跳转到主内容

Samsung NX1 Navigation Buttons Replacement

你所需要的

  1. Samsung NX1 Navigation Buttons Replacement, Viewfinder Focus Dial: 步骤 1 中的图像 1,2 Samsung NX1 Navigation Buttons Replacement, Viewfinder Focus Dial: 步骤 1 中的图像 2,2
    • Push the rubber viewfinder grip upward.

  2. Samsung NX1 Navigation Buttons Replacement: 步骤 2 中的图像 1,2 Samsung NX1 Navigation Buttons Replacement: 步骤 2 中的图像 2,2
    • Use the Phillips #00 screwdriver to remove one 6.4 mm screw in the center of the dial.

    • Remove the dial by lifting upward with your fingers.

  3. Samsung NX1 Navigation Buttons Replacement, Back Cover: 步骤 3 中的图像 1,3 Samsung NX1 Navigation Buttons Replacement, Back Cover: 步骤 3 中的图像 2,3 Samsung NX1 Navigation Buttons Replacement, Back Cover: 步骤 3 中的图像 3,3
    • Use the Phillips #00 screwdriver to remove the four 5.5 mm screws surrounding the viewfinder.

    • Use your fingers to lift the plastic viewfinder cover upward.

  4. Samsung NX1 Navigation Buttons Replacement: 步骤 4 中的图像 1,2 Samsung NX1 Navigation Buttons Replacement: 步骤 4 中的图像 2,2
    • Use the Phillips #00 screwdriver to remove the two 5.5 mm screws from the right side of the camera above the SD card port.

  5. Samsung NX1 Navigation Buttons Replacement: 步骤 5 中的图像 1,1
    • Use the Phillips #00 screwdriver to remove one 5.5 mm screw on the left, above the HDMI port.

  6. Samsung NX1 Navigation Buttons Replacement: 步骤 6 中的图像 1,1
    • Use the Phillips #00 screwdriver to remove the five 5.5 mm screws from the bottom, near the battery compartment.

    • Use the Phillips #00 screwdriver to remove one 3.8 mm screw from the bottom of the hand grip, below the battery compartmen.

  7. Samsung NX1 Navigation Buttons Replacement: 步骤 7 中的图像 1,3 Samsung NX1 Navigation Buttons Replacement: 步骤 7 中的图像 2,3 Samsung NX1 Navigation Buttons Replacement: 步骤 7 中的图像 3,3
    • Use a plastic opening tool to separate the back cover from the front cover.

    • Pry the back cover in this order: bottom, right side, left side.

  8. Samsung NX1 Navigation Buttons Replacement: 步骤 8 中的图像 1,2 Samsung NX1 Navigation Buttons Replacement: 步骤 8 中的图像 2,2
    • Use your fingers to pull the back cover away from the front cover.

    • Do not completely separate the back cover from the front cover as two cables hold these components together.

  9. Samsung NX1 Navigation Buttons Replacement: 步骤 9 中的图像 1,3 Samsung NX1 Navigation Buttons Replacement: 步骤 9 中的图像 2,3 Samsung NX1 Navigation Buttons Replacement: 步骤 9 中的图像 3,3
    • Use tweezers to pull the two ribbon cables horizontally out of their clips.

  10. Samsung NX1 Navigation Buttons Replacement, Navigation Buttons: 步骤 10 中的图像 1,1
    • Use the Phillips #00 screwdriver to remove the six screws (three silver 3.5 mm screws and three black 4.2 mm screws).

  11. Samsung NX1 Navigation Buttons Replacement: 步骤 11 中的图像 1,1
    • Use the tweezers to pull the blue ribbon cable horizontally out of its clip.

  12. Samsung NX1 Navigation Buttons Replacement: 步骤 12 中的图像 1,2 Samsung NX1 Navigation Buttons Replacement: 步骤 12 中的图像 2,2
    • Use your fingers to remove the metal piece with the blue ribbon cable and the rubber buttons lying underneath.

结论

To reassemble your device, follow these instructions in reverse order.

Hannah Patrick

于02/24/16注册

891 声望

创作了6篇指南

团队

USF Tampa, Team 1-4, Leahy Spring 2016 USF Tampa, Team 1-4, Leahy Spring 2016 的会员

USFT-LEAHY-S16S1G4

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 4

总计 511