Samsung NP900X4B RAM Replacement

步骤 1 RAM

• This guide should be attempted after the removal of the back panel is completed.
• The Battery Removal guide demonstrates how to do this. The link to this guide is posed here. Samsung NP900X4B Battery Replacement
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 2

• Locate the two sticks or DDR3 RAM. They can be found in the upper right-hand corner.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 3
• Use a plastic opening tool to nudge one clamp holding one stick of RAM outward. If done correctly the clamp should move away from the stick of RAM. Do this with the clamp on the opposite side of the same stick or RAM. The stick of RAM will pop up when both clamps are released
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 4
• Repeat step 3 with the second stick of RAM. Again, when this is done correctly the RAM should pop up at an angle away from the laptop.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论
步骤 5
• Perform the previous steps in the reverse order to install two new sticks of RAM into the DDR3 slots. Make sure that the clamps click back in place. Failure to do so could result in non responsive sticks of RAM. If this is an issue, not to worry. Try taking the clamps off and reinstering the RAM.
编辑
添加一条评论
添加一条评论
添加评论
1024
取消 发帖评论

作者

与3其他贡献者

Bryton Lawrence

于10/17/18注册

309 声望

创作了2篇指南

徽章: 6

• 
• 
• 

+ 3更多徽章

团队

UMass Dartmouth, Team S4-G6, Valliere Fall 2018 UMass Dartmouth, Team S4-G6, Valliere Fall 2018 的会员

UMASSD-VALLIERE-F18S4G6

5 名成员

创作了6篇指南

嵌入本指南

选择一个尺寸并复制下面的代码，将本指南作为一个小插件嵌入到你的网站/论坛中。

预览