跳转到主内容

Samsung NP-130-JA01US Fan Replacement

你所需要的

  1. Samsung NP-130-JA01US Fan Replacement, Battery: 步骤 1 中的图像 1,1
    • Turn off the computer.

    • Disconnect the charger cable from the computer.

    • Failure to disconnect the charger cable from the computer could result in an electric shock.

    • Flip the computer over so the underside is facing up.

  2. Samsung NP-130-JA01US Fan Replacement: 步骤 2 中的图像 1,2 Samsung NP-130-JA01US Fan Replacement: 步骤 2 中的图像 2,2
    • Slide the left and right slider buttons fully away from each other.

  3. Samsung NP-130-JA01US Fan Replacement: 步骤 3 中的图像 1,1
    • Pull the battery out of the computer.

  4. Samsung NP-130-JA01US Fan Replacement, Fan: 步骤 4 中的图像 1,2 Samsung NP-130-JA01US Fan Replacement, Fan: 步骤 4 中的图像 2,2
    • Using a Phillips 1 screwdriver, carefully remove all 12 screws of the back cover.

    • The screws are Phillips 1 (PH 1) with a length of 60 millimeters (mm)

    • Do not force the screwdriver as you might damage the screws.

  5. Samsung NP-130-JA01US Fan Replacement: 步骤 5 中的图像 1,3 Samsung NP-130-JA01US Fan Replacement: 步骤 5 中的图像 2,3 Samsung NP-130-JA01US Fan Replacement: 步骤 5 中的图像 3,3
    • With the plastic opening tool, carefully separate the back cover from the computer frame.

    • Starting at one of the corners of the computer, work your way around the edge until you reach the other corner.

    • Do not attempt to pry it open, putting too much force into one location might damage the computer.

    • As you go around the sides of the computer, free the inside latches with the plastic opening tool.

    • Once you have an opening, carefully use your hands to separate the back cover.

  6. Samsung NP-130-JA01US Fan Replacement: 步骤 6 中的图像 1,2 Samsung NP-130-JA01US Fan Replacement: 步骤 6 中的图像 2,2
    • Locate the fan (marked in a red square).

  7. Samsung NP-130-JA01US Fan Replacement: 步骤 7 中的图像 1,3 Samsung NP-130-JA01US Fan Replacement: 步骤 7 中的图像 2,3 Samsung NP-130-JA01US Fan Replacement: 步骤 7 中的图像 3,3
    • Using a Phillips 1 screwdriver, remove the screw marked in a red circle.

    • The screw is a Phillips 1 (PH 1) with a length of 40 millimeters (mm)

    • Do not use too much force on the screw driver, you might damage the screw.

    • Using your hands, carefully unplug the cords marked in a green square.

  8. Samsung NP-130-JA01US Fan Replacement: 步骤 8 中的图像 1,2 Samsung NP-130-JA01US Fan Replacement: 步骤 8 中的图像 2,2
    • Carefully remove the fan.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

团队

USF Tampa, Team 9-6, Lacy Fall 2016 USF Tampa, Team 9-6, Lacy Fall 2016 的会员

USFT-LACY-F16S9G6

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 252