简介

Use this guide to replace the motherboard of the Samsung Mythic SGH-a897.

  1. Slide your fingernail into the slit at the bottom of the phone to remove the back cover.
    • Slide your fingernail into the slit at the bottom of the phone to remove the back cover.

    添加评论

  2. Place your finger in either of the bottom corner of the battery slot and lift to remove the battery.
    • Place your finger in either of the bottom corner of the battery slot and lift to remove the battery.

    添加评论

    • Remove six 5 mm Phillips #0 screws from the back of the phone.

    添加评论

    • Insert a plastic opening tool into the seam between the back case and the rest of the phone.

    • Working along the seam, pry the back from the phone.

    添加评论

    • Use a plastic opening tool to disconnect the camera cable from the motherboard.

    • Carefully remove the camera from the phone.

    添加评论

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the two remaining 3.75 mm Phillips screws.

    添加评论

    • Firmly grip the black lever with tweezers

    • Use the tweezers to flip the black lever up so that it is perpendicular to the motherboard.

    添加评论

    • Carefully use the tweezers to slide the black ZIF cable out of the socket.

    添加评论

    • Use the tweezers to unclip the black connector as shown.

    添加评论

    • Use the tweezers to unclip the orange flexible circuit board from the side of the phone.

    添加评论

    • Use the tweezers to unclip the other orange, smaller flexible circuit board.

    • Work carefully. This is a very delicate part of the phone that can easily be broken.

    添加评论

    • Slide one side of the tweezers underneath the red and blue wires of the capacitor.

    • Carefully apply pressure away from the phone to lift.

    添加评论

    • Carefully tilt the motherboard up from the back of the phone.

    • Don't remove the motherboard completely. There is one more clip on the backside of the motherboard that needs to be removed.

    • Use tweezers to unclip the black connector.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Morgan Yost

于2013年04月08日注册

46 信誉积分

创作了6篇指南

团队

Cal Poly, Team 17-1, Regan Spring 2013 Cal Poly, Team 17-1, Regan Spring 2013 的会员

CPSU-REGAN-S13S17G1

4 名成员

创作了18篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 2

总计 327