跳转到主内容

简介

This guide details how to install a new camera button on your Samsung Moment SPH M900. The camera button is located on the lower right side, distinguished by a black line. We provide directions for both disassembly and reassembly.

  1. Power off the phone using the "Power Button", the circular middle button in the center of the phone. Locate the camera button on bottom right side of your phone Remove the back panel of the phone by sliding the spudger along the edge of the phone. The rear plastic panel will snap off from the remainder of the phone.
    • Power off the phone using the "Power Button", the circular middle button in the center of the phone.

    • Locate the camera button on bottom right side of your phone

    • Remove the back panel of the phone by sliding the spudger along the edge of the phone. The rear plastic panel will snap off from the remainder of the phone.

  2. Remove the battery from the phone by pulling up on the battery edge.
    • Remove the battery from the phone by pulling up on the battery edge.

  3. If you have not already removed the memory card, remove it by gently sliding it out of its holder.
    • If you have not already removed the memory card, remove it by gently sliding it out of its holder.

  4. Using the small Phillips #000 screw driver, remove the six screws from the back of the phone. Using the spudger tool, separate the back housing from the phone. While separating the back house from the phone, the three buttons (the volume, the speaker, and the camera button) might fall out. Be sure to keep track of these three buttons and use them for reassembly.
    • Using the small Phillips #000 screw driver, remove the six screws from the back of the phone.

    • Using the spudger tool, separate the back housing from the phone.

    • While separating the back house from the phone, the three buttons (the volume, the speaker, and the camera button) might fall out. Be sure to keep track of these three buttons and use them for reassembly.

  5. If the camera button did not fall, carefully remove it using a pair of tweezers. At this point, you can replace the button with  a new one. If the camera button did not fall, carefully remove it using a pair of tweezers. At this point, you can replace the button with  a new one.
    • If the camera button did not fall, carefully remove it using a pair of tweezers. At this point, you can replace the button with a new one.

结论

To reassemble your device, follow these instructions in reverse order.

Be sure to gently slide the memory card back in its holder.

3等其他人完成本指南。

Allison Coffee

于2013年09月26日注册

214 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 603