Menu

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

Samsung Juke Logic Board Replacement

撰写者： Renee Kuzniar (和另外9个贡献者)
  • 评论： 0
  • 收藏 1
  • 完成 2

难度

简单

Steps

11

Time Required

建议一个时间??

节

3

Flags

0

介绍

This guide is a step-by-step guide on how to replace a Samsung Juke logic board.

  1. Locate the button on the bottom of the phone. Once located, press and hold the button down.

    • Locate the button on the bottom of the phone. Once located, press and hold the button down.

    编辑

  2. While holding the button down, remove the back cover of the phone. While holding the button down, remove the back cover of the phone.

    • While holding the button down, remove the back cover of the phone.

    编辑

  3. Use the size 00 Phillips screwdriver to remove the four screws located on the back of the phone. These screws are circled in yellow in the given image.

    • Use the size 00 Phillips screwdriver to remove the four screws located on the back of the phone. These screws are circled in yellow in the given image.

    编辑

  4. Using the same 00 Phillips screwdriver, remove the two screws at the bottom back plate of the phone near the camera and the speaker.

    • Using the same 00 Phillips screwdriver, remove the two screws at the bottom back plate of the phone near the camera and the speaker.

    • These screws will be 7.25 mm long.

    编辑

  5. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

  6. Before proceeding, locate the USB port (where the charger can be plugged in) and open it using the iFixit Opening Tool. Failure to open USB port cover at this stage may result in damaging the device. Failure to open USB port cover at this stage may result in damaging the device.

    • Before proceeding, locate the USB port (where the charger can be plugged in) and open it using the iFixit Opening Tool.

    • Failure to open USB port cover at this stage may result in damaging the device.

    编辑

  7. Remove the screws on either side of the camera/speaker with a Phillips 00 screwdriver.

    • Remove the screws on either side of the camera/speaker with a Phillips 00 screwdriver.

    • These screws will be 5.45 mm long.

    编辑

  8. Use the iFixit Opening Tool to begin removing the camera/speaker from the logic board. Practice caution to prevent damage to the attaching ribbon.

    • Use the iFixit Opening Tool to begin removing the camera/speaker from the logic board.

    • Practice caution to prevent damage to the attaching ribbon.

    编辑

  9. To completely remove the camera/speaker, locate the orange attachment beneath it (as shown in the image). Then, use the iFixit Opening Tool to gently pry the camera/speaker off.

    • To completely remove the camera/speaker, locate the orange attachment beneath it (as shown in the image).

    • Then, use the iFixit Opening Tool to gently pry the camera/speaker off.

    编辑

  10. Use the iFixit Opening Tool to pop off the yellow tab on the logic board. Use the iFixit Opening Tool to pop off the yellow tab on the logic board.

    • Use the iFixit Opening Tool to pop off the yellow tab on the logic board.

    编辑

  11. Use the iFixit Opening Tool to pop off the other orange tab to free the logic board. Use the iFixit Opening Tool to pop off the other orange tab to free the logic board.

    • Use the iFixit Opening Tool to pop off the other orange tab to free the logic board.

    编辑

  12. To completely remove the logic board, use the iFixit Opening Tool to pop it up, then use your fingers to pull it out. Do not be alarmed if the volume and hold switch buttons are removed from the logic board. Do not be alarmed if the volume and hold switch buttons are removed from the logic board.

    • To completely remove the logic board, use the iFixit Opening Tool to pop it up, then use your fingers to pull it out.

    • Do not be alarmed if the volume and hold switch buttons are removed from the logic board.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与9其他贡献者

Renee Kuzniar

于2010年04月13日注册

82 Reputation

创作了4篇指南

徽章: 7

+ 4更多徽章

Team

Cal Poly, Team 6-18, Maness Spring 2010 Cal Poly, Team 6-18, Maness Spring 2010 的会员

CPSU-MANESS-S10S6G18

3 名成员

创作了12篇指南

0 Comments

Add a comment

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 2,723