跳转到主内容

简介

Use this guide to install a rear case.

  1. Slide the battery cover downwards with pressure focused on the center of the cover.
    • Slide the battery cover downwards with pressure focused on the center of the cover.

    • Lift the cover off of the phone.

  2. Grasp the bottom left and right corners of the battery and lift it from its housing.
    • Grasp the bottom left and right corners of the battery and lift it from its housing.

  3. PC 笔记本电池

    所有顶级PC品牌的电池均以我们的质量保证为后盾。

    现在开始购物

    PC 笔记本电池

    所有顶级PC品牌的电池均以我们的质量保证为后盾。

    现在开始购物
  4. Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.
    • Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.

  5. The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force. Insert the Plastic Opening Tool in between the front and rear cases. Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.
    • The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.

    • Insert the Plastic Opening Tool in between the front and rear cases.

    • Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.

  6. Lift the rear case off of the phone.
    • Lift the rear case off of the phone.

结论

To reassemble your device, follow these instructions in reverse order.

Paul Piller

于2011年04月12日注册

56 信誉积分

创作了5篇指南

团队

Cal Poly, Team 24-57, Amido Spring 2011 Cal Poly, Team 24-57, Amido Spring 2011 的会员

CPSU-AMIDO-S11S24G57

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,061