跳转到主内容

Samsung HMX-W300 LCD Screen Replacement

你所需要的

  1. Samsung HMX-W300 LCD Screen Replacement, Disassembling Samsung HMX-W300: 步骤 1 中的图像 1,3 Samsung HMX-W300 LCD Screen Replacement, Disassembling Samsung HMX-W300: 步骤 1 中的图像 2,3 Samsung HMX-W300 LCD Screen Replacement, Disassembling Samsung HMX-W300: 步骤 1 中的图像 3,3
    • To remove the wristband of the device, grab the middle loop and pull the band through.

  2. Samsung HMX-W300 LCD Screen Replacement: 步骤 2 中的图像 1,2 Samsung HMX-W300 LCD Screen Replacement: 步骤 2 中的图像 2,2
    • Remove four screws with a Hex 1.5 mm screwdriver.

  3. Samsung HMX-W300 LCD Screen Replacement: 步骤 3 中的图像 1,3 Samsung HMX-W300 LCD Screen Replacement: 步骤 3 中的图像 2,3 Samsung HMX-W300 LCD Screen Replacement: 步骤 3 中的图像 3,3
    • Open the HDMI door on the side of the camera.

    • Remove the single screw using a Phillips #00 screwdriver.

  4. Samsung HMX-W300 LCD Screen Replacement: 步骤 4 中的图像 1,3 Samsung HMX-W300 LCD Screen Replacement: 步骤 4 中的图像 2,3 Samsung HMX-W300 LCD Screen Replacement: 步骤 4 中的图像 3,3
    • Use the iFixit opening tool on both sides on the device. Pry apart both sections with light force.

    • Do not apply too much force. There is a wire that attaches the front case with the rear case that can be damaged.

  5. Samsung HMX-W300 LCD Screen Replacement: 步骤 5 中的图像 1,3 Samsung HMX-W300 LCD Screen Replacement: 步骤 5 中的图像 2,3 Samsung HMX-W300 LCD Screen Replacement: 步骤 5 中的图像 3,3
    • Pull the wire ribbon out with a pair of tweezers.

  6. Samsung HMX-W300 LCD Screen Replacement, Remove tape.: 步骤 6 中的图像 1,3 Samsung HMX-W300 LCD Screen Replacement, Remove tape.: 步骤 6 中的图像 2,3 Samsung HMX-W300 LCD Screen Replacement, Remove tape.: 步骤 6 中的图像 3,3
    • Use tweezers to remove the tape.

  7. Samsung HMX-W300 LCD Screen Replacement, Unplug wire ribbon.: 步骤 7 中的图像 1,2 Samsung HMX-W300 LCD Screen Replacement, Unplug wire ribbon.: 步骤 7 中的图像 2,2
    • Use tweezers to grab the wire ribbon, then pull the wire out of connection.

  8. Samsung HMX-W300 LCD Screen Replacement, Remove scerws.: 步骤 8 中的图像 1,2 Samsung HMX-W300 LCD Screen Replacement, Remove scerws.: 步骤 8 中的图像 2,2
    • There are 5 Phillips size 00 screws. Remove all 5 screws.

    • Wire ribbon is attached to the motherboard.

  9. Samsung HMX-W300 LCD Screen Replacement: 步骤 9 中的图像 1,1
    • Pry the motherboard up using the plastic opening tool.

    • Be careful there is a wire ribbon holding the motherboard.

  10. Samsung HMX-W300 LCD Screen Replacement, Disconnect wire ribbon.: 步骤 10 中的图像 1,2 Samsung HMX-W300 LCD Screen Replacement, Disconnect wire ribbon.: 步骤 10 中的图像 2,2
    • Use tweezers to disconnect the wire as shown. This will loosen the motherboard from the rear case.

  11. Samsung HMX-W300 LCD Screen Replacement, Remove screws.: 步骤 11 中的图像 1,3 Samsung HMX-W300 LCD Screen Replacement, Remove screws.: 步骤 11 中的图像 2,3 Samsung HMX-W300 LCD Screen Replacement, Remove screws.: 步骤 11 中的图像 3,3
    • Use Phillips size 00 and remove the 3 screws as shown.

  12. Samsung HMX-W300 LCD Screen Replacement, Pry screen.: 步骤 12 中的图像 1,2 Samsung HMX-W300 LCD Screen Replacement, Pry screen.: 步骤 12 中的图像 2,2
    • Pry the end of the screen with the plastic opening tool.

  13. Samsung HMX-W300 LCD Screen Replacement: 步骤 13 中的图像 1,3 Samsung HMX-W300 LCD Screen Replacement: 步骤 13 中的图像 2,3 Samsung HMX-W300 LCD Screen Replacement: 步骤 13 中的图像 3,3
    • Grab the end of the screen, then pull towards the inside of the case. This is a bit tricky. This will release tabs at the top of the screen to the rear case.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Robert

于01/21/15注册

966 声望

创作了8篇指南

团队

USF Tampa, Team 9-2, Blackwell Winter 2015 USF Tampa, Team 9-2, Blackwell Winter 2015 的会员

USFT-BLACKWELL-W15S9G2

4 名成员

创作了16篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 362