修复你的物品 社区 商店

Samsung Gear VR with Controller Motherboard Replacement

简介

If the buttons on your controller are not responding, use this guide to replace the motherboard in your controller. This replacement requires a metal spudger, iFixit opening tool, and Phillips #000 screwdriver.

你所需要的

  1. Samsung Gear VR with Controller Motherboard Replacement, Controller Batteries: 步骤 1 中的图像 1，3 Samsung Gear VR with Controller Motherboard Replacement, Controller Batteries: 步骤 1 中的图像 2，3 Samsung Gear VR with Controller Motherboard Replacement, Controller Batteries: 步骤 1 中的图像 3，3

    • Turn the controller upside down to access the battery compartment.

    • The battery compartment is located on the opposite side of the buttons.

    • Press on the top of the battery plate and slide down to remove the cover.

    翻译

  2. Samsung Gear VR with Controller Motherboard Replacement: 步骤 2 中的图像 1，3 Samsung Gear VR with Controller Motherboard Replacement: 步骤 2 中的图像 2，3 Samsung Gear VR with Controller Motherboard Replacement: 步骤 2 中的图像 3，3

    • Remove the AAA batteries using your fingers.

    翻译

  4. Samsung Gear VR with Controller Motherboard Replacement, Controller Motherboard: 步骤 3 中的图像 1，2 Samsung Gear VR with Controller Motherboard Replacement, Controller Motherboard: 步骤 3 中的图像 2，2

    • Remove the four 5mm Phillips #000 screws.

    翻译

  5. Samsung Gear VR with Controller Motherboard Replacement: 步骤 4 中的图像 1，1

    • Use the metal spudger to pry the back side of the controller apart from the front.

    • You will have to use the spudger in many different spots along the divide before trying to separate the pieces.

    翻译

  6. Samsung Gear VR with Controller Motherboard Replacement: 步骤 5 中的图像 1，2 Samsung Gear VR with Controller Motherboard Replacement: 步骤 5 中的图像 2，2

    • Pull apart the two halves of the controller to access the motherboard.

    翻译

  7. Samsung Gear VR with Controller Motherboard Replacement: 步骤 6 中的图像 1，3 Samsung Gear VR with Controller Motherboard Replacement: 步骤 6 中的图像 2，3 Samsung Gear VR with Controller Motherboard Replacement: 步骤 6 中的图像 3，3

    • Pry on the two pop connectors with the plastic opening tool to detach the motherboard.

    • Separate the motherboard and trackpad from the rear part of the controller.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与1其他贡献者

Jake Criscione

于01/24/19注册

587 声望

创作了3篇指南

徽章: 11

+ 8更多徽章

团队

Cal Poly, Team S18-G3, White Winter 2019 Cal Poly, Team S18-G3, White Winter 2019 的会员

CPSU-WHITE-W19S18G3

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 3

过去 30 天： 11

总计 951