跳转到主内容

简介

This guide will list all required steps to properly replace the batteries in the back of the Samsung Gear VR's controller. The controller is powered by two AAA batteries. No tools are required for this replacement.

  1. Turn the controller upside down to access the battery compartment. The battery compartment is located on the opposite side of the buttons. Press on the top of the battery plate and slide down to remove the cover.
    • Turn the controller upside down to access the battery compartment.

    • The battery compartment is located on the opposite side of the buttons.

    • Press on the top of the battery plate and slide down to remove the cover.

  2. Remove the AAA batteries using your fingers. Remove the AAA batteries using your fingers. Remove the AAA batteries using your fingers.
    • Remove the AAA batteries using your fingers.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Luke Moravitz

于2019年01月24日注册

94 信誉积分

撰写一个指南

团队

Cal Poly, Team S18-G3, White Winter 2019 Cal Poly, Team S18-G3, White Winter 2019 的会员

CPSU-WHITE-W19S18G3

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 6

过去的30天: 18

总计 650