跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

If your battery is dead, damaged, or simply dies too quickly then use this guide to replace it. Be cautious as to not damage the ribbon cable or to puncture the battery.

  1. Place the watch screen-down so that its back cover is showing.
    • Place the watch screen-down so that its back cover is showing.

  2. Remove the four 4.2mm screws with a Y00 screwdriver. Remove the four 4.2mm screws with a Y00 screwdriver.
    • Remove the four 4.2mm screws with a Y00 screwdriver.

  3. Wedge the metal spudger in between the back cover and the frame along the seam. Use force to pry the back cover away from the main watch frame. This step requires a lot of force. You can use a Jimmy in place of a metal spudger to make the process easier.
    • Wedge the metal spudger in between the back cover and the frame along the seam.

    • Use force to pry the back cover away from the main watch frame.

    • This step requires a lot of force. You can use a Jimmy in place of a metal spudger to make the process easier.

    • This step will ruin the water-proof seal.

  4. LCD iPhone 屏幕维修套装

    预算选项,涵盖在我们的终身保修中。

    购买套装

    LCD iPhone 屏幕维修套装

    削减维修成本,而不是质量。

    购买套装
  5. Detach the three connectors on the motherboard using your fingernail. The connectors are easy to pop off. Minimal force is necessary. The connectors are easy to pop off. Minimal force is necessary.
    • Detach the three connectors on the motherboard using your fingernail.

    • The connectors are easy to pop off. Minimal force is necessary.

  6. Separate the motherboard and front screen assembly using a spudger. Separate the motherboard and front screen assembly using a spudger. Separate the motherboard and front screen assembly using a spudger.
    • Separate the motherboard and front screen assembly using a spudger.

    Oui tuto bien clair. Opération réussi !

    Bien qu’adroit de mes mains, et après avoir découvert la “bête à coeur ouvert”, je ne sais pas si je me serais lancé... C’est tout l’interêt de ce Tuto qui invite à le faire (car pas trop de détails), et qui suivit pas à pas permet de s’en sortir. Bravo

    Merci Dan.S

    Dan.S - 回复

  7. Using a JIS #00 screwdriver, remove the two 4.5 mm screws. Using a JIS #00 screwdriver, remove the two 4.5 mm screws.
    • Using a JIS #00 screwdriver, remove the two 4.5 mm screws.

  8. Disconnect the battery ribbon cable from bracket. Separate the chassis from the motherboard. Be careful with the battery ribbon cable, as it is very easy to break (ours did when disassembling).
    • Disconnect the battery ribbon cable from bracket.

    • Separate the chassis from the motherboard.

    • Be careful with the battery ribbon cable, as it is very easy to break (ours did when disassembling).

    • Note how the end of the ribbon cable seats in the plastic chassis. Look for the plastic pin on the chassis when re-seating.

    What happens if the battery ribbons breaks?

    sarah rus - 回复

  9. Separate the battery from the motherboard. The battery and the motherboard are secured with adhesive; some force is needed.
    • Separate the battery from the motherboard.

    • The battery and the motherboard are secured with adhesive; some force is needed.

    • Lithium-ion batteries are potentially dangerous. Handle with extreme care and do not puncture the battery.

结论

To reassemble your device, follow these instructions in reverse order.

57等其他人完成本指南。

William Hurty

于2018年10月08日注册

1,475 信誉积分

创作了3篇指南

团队

Cal Poly, Team S15-G2, White Fall 2018 Cal Poly, Team S15-G2, White Fall 2018 的会员

CPSU-WHITE-F18S15G2

4 名成员

创作了31篇指南

Is there a way to reseal the watch making it water proof?

David R - 回复

If the seal was damaged during opening the backcover, unfortunately you need a new backcover, cause the seal is integrated in the case.

Frank Mauderer -

where to buy the battery?

popoypoi22 - 回复

https://www.amazon.com/Tesurty-Replaceme...

I bought mine from Amazon. Just replaced the battery after all the tool kit came in. It works like brand new!

Jae Shim -

is there a kit somewhere for the battery/new seal

Adam Seidlitz - 回复

If the seal was damaged during opening the backcover, unfortunately you need a new backcover, cause the seal is integrated in the case.

I bought mine here:

Battery: https://www.schreiber-electronics.de/sam...

Backcover with integrated seal: https://www.schreiber-electronics.de/sam...

Frank Mauderer -

The battery is part number EB-BR760ABE (as seen on picture in step 8). You can find it on Amazon and eBay.

did4 - 回复

Most difficult part is getting that battery connector back in place. Otherwise, it’s a simple process. Just make sure to be careful with the connectors if you’re not used to playing with them.

hawleyst - 回复

this guide is really well done my device works perfectly fine now and was super easy also I believe that there is a gasket and so you don't think have to buy a sealer

Landre Farrell - 回复

i made the mistake of pulling the board too hard…The flex cable didnt break but it came lose from the board. Is there anyway to glue it back?

Kelvin Ventura - 回复

If you do not put the spudger in so deep as to damage the seal you do not need to replace it. Also, you do not need to remove the whole internals to replace the battery, if you disconnect the battery cable after removing the two #00 philips the battery and circuit board pivot open. Here is someone doing this same repair as I describe.

Brent Quick - 回复

The battery in the photo shows the S/N but if your original battery # is Eb-br760, Eb-br760abe then you can find it at www.canadianbatteries.com

https://www.canadianbatteries.com/batter...

Dan Clark - 回复

I need Gear s3 battery

Asmat khan - 回复

I replaced the battery but when I put it on the charger it started flashing red, I read somewhere it means its unable to charge, any advice?

baculpojl - 回复

Screwdriver didn't fix where can I find a 2mm screwdriver?

bowieinc - 回复

I'm using the 64-bit driver kit from ifixit. The Y00 tri-tip bit doesn't grab the screw heads on the back of the watch casing. Is there another bit or driver kit that works better for this application? Note: I've tried the bits Y000 and Y0 and the pitch still doesn't grab properly.

Paxton Powers - 回复

Can the Battery of the Galaxy Watch be used for the Gear S3?

Dzoni Filipovic - 回复

After following these steps, the battery was replaced. The watch charges and reaches 100%, screen shows the percentage, but the watch will not power on. No cables were torn. Would you know what went wrong?

Jerry Castillo - 回复

Replaced battery but still only getting 24 hours (same as battery I replaced). Does it get better over time ?

Thanks in advance

Michael Humble - 回复

I replaced my battery a few days ago, and it lasts (Theorically) about a one day and 22 hours, but it depends on how you use it. So I’m afraid that it won’t get better after a little time.

Anyway, Samsung website says this: “With the Gear S3, you can go for up to four days before putting it down for a charge. Its battery lasts that long.

*Battery life may vary depending on usage and settings.”

I don’t use it with the maximum performance and I still not getting those 4 days. If it changes for you, let us know!

I hope it gets better.

MemoryOverflow -

So I just replaced my battery in my S3 and so far is working just find. Charge is going up no issues so far.

Ricky's Journey - 回复

添加评论

浏览统计数据:

过去的24小时: 52

过去的7天: 387

过去的30天: 2,085

总计 39,224