跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Has the buckle on the strap of your watch become broken, or do you just want to replace the factory strap with a custom one? Just swap it out.

配件

没有特定配件。

  1. Flip the watch over so that the face is down. Using a Y#0 screwdriver, unscrew the four 3.5 millimeter tri-head screws.
    • Flip the watch over so that the face is down.

    • Using a Y#0 screwdriver, unscrew the four 3.5 millimeter tri-head screws.

    • Remember to turn off the watch to avoid being shocked.

  2. Using your finger, push forward on the release while pulling up on the strap. You may find it helpful to use the flat end of a spudger to push on the release instead of your finger.
    • Using your finger, push forward on the release while pulling up on the strap.

    • You may find it helpful to use the flat end of a spudger to push on the release instead of your finger.

  3. Repeat the procedure from step 2 for the other strap. Repeat the procedure from step 2 for the other strap.
    • Repeat the procedure from step 2 for the other strap.

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Jacob Baldwin

于2017年02月20日注册

2,640 信誉积分

创作了5篇指南

团队

USF Tampa, Team S2-G3, Sullivan Spring 2017 USF Tampa, Team S2-G3, Sullivan Spring 2017 的会员

USFT-SULLIVAN-S17S2G3

3 名成员

创作了18篇指南

can you also provide instruction to change home button on Gear S2

thanks

inder kapoor - 回复

you have to buy the continuing transfunctioner to change the home button on the gear s2

i have some for sale if interested

bobby - 回复

Where can you buy new straps?

Olga Andreu - 回复

YOU DO NOT NEED TO REMOVE THE SCREWS. Step 1 is completely irrelevant.

Ryo Kimball - 回复

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 32

过去的30天: 143

总计 4,200