跳转到主内容

你所需要的

  1. Samsung Galaxy Tab A 10.1 Motherboard Replacement, Back Panel: 步骤 1 中的图像 1,2 Samsung Galaxy Tab A 10.1 Motherboard Replacement, Back Panel: 步骤 1 中的图像 2,2
    • Have the front of the device facing you.

    • Begin near one of the curved edges of the device (see photo two for visual example).

    • Place a plastic opening tool between the front and back panels.

    • If a plastic opening tool doesn’t work, using a metal spudger may work, but it may damage the plastic on the device.

    • Remember to remove the micro SD card (if present) before you begin.

  2. Samsung Galaxy Tab A 10.1 Motherboard Replacement: 步骤 2 中的图像 1,2 Samsung Galaxy Tab A 10.1 Motherboard Replacement: 步骤 2 中的图像 2,2
    • Once the plastic opening tool is fully inserted, wedge it around the device’s edges to separate the panels.

    • Lift the back panel off of the device.

    • The back panel will make a clicking noise while being lifted off of the device.

  3. Samsung Galaxy Tab A 10.1 Motherboard Replacement, Disconnecting the battery: 步骤 3 中的图像 1,1
    • Remove the adhesive film and flip up the retaining flap on the ZIF battery connector.

    • Slide the orange battery ribbon cable out of the ZIF connector.

  4. Samsung Galaxy Tab A 10.1 Motherboard Replacement: 步骤 4 中的图像 1,2 Samsung Galaxy Tab A 10.1 Motherboard Replacement: 步骤 4 中的图像 2,2
    • Remove the adhesive film, lift the retaining tab and withdraw the white speaker ribbon.

  5. Samsung Galaxy Tab A 10.1 Motherboard Replacement: 步骤 5 中的图像 1,3 Samsung Galaxy Tab A 10.1 Motherboard Replacement: 步骤 5 中的图像 2,3 Samsung Galaxy Tab A 10.1 Motherboard Replacement: 步骤 5 中的图像 3,3
    • Lift the retaining tab and withdraw the black LCD ribbon.

  6. Samsung Galaxy Tab A 10.1 Motherboard Replacement, Battery removal: 步骤 6 中的图像 1,2 Samsung Galaxy Tab A 10.1 Motherboard Replacement, Battery removal: 步骤 6 中的图像 2,2
    • Using a Phillips #000 screwdriver, remove the ten 4 mm screws around the battery.

    • Slide a plastic opening tool under the bottom of the battery close to the speakers and lift up.

    • The large rectangular white and black piece is the entire battery. Be careful not to puncture it.

  7. Samsung Galaxy Tab A 10.1 Motherboard Replacement, Motherboard: 步骤 7 中的图像 1,3 Samsung Galaxy Tab A 10.1 Motherboard Replacement, Motherboard: 步骤 7 中的图像 2,3 Samsung Galaxy Tab A 10.1 Motherboard Replacement, Motherboard: 步骤 7 中的图像 3,3
    • Flip up the two ZIF connectors on the motherboard using the plastic opening tool.

    • Slide the orange ribbon cables out of the ZIF connectors.

    • Remove the front-facing camera.

  8. Samsung Galaxy Tab A 10.1 Motherboard Replacement: 步骤 8 中的图像 1,1
    • Disconnect the headphone jack from the motherboard.

    • Use a Phillips # 000 to remove six 4mm screws.

  9. Samsung Galaxy Tab A 10.1 Motherboard Replacement: 步骤 9 中的图像 1,2 Samsung Galaxy Tab A 10.1 Motherboard Replacement: 步骤 9 中的图像 2,2
    • Lodge the plastic opening tool under and lift the motherboard out of the tablet.

    • Be careful not to snag any connectors.

    • Remove the metal bracket that was underneath the charging port and set aside.

结论

To reassemble your device, follow these instructions in reverse order.

11等其他人完成本指南。

Isabella Li

于2017年10月02日注册

2,280 声望

创作了7篇指南

团队

Cal Poly, Team S15-G6, Livingston Fall 2017 Cal Poly, Team S15-G6, Livingston Fall 2017 的会员

CPSU-LIVINGSTON-F17S15G6

4 名成员

创作了26篇指南

一条评论

habe es geschafft zum zerlegen... leider ist nur der verschluss vom LCD hops gegangen. Ohne diesen geht wohl nix. Kein Bild.

Mike Muley - 回复

添加评论

浏览统计数据:

过去 24 小时: 7

过去 7 天: 40

过去 30 天: 184

总计 14,106