跳转到主内容
  1. Using the prying tool, pry the silver binding from around tablet from glass edge. You will need to go around the device several times applying some force before it comes off. Using the prying tool, pry the silver binding from around tablet from glass edge. You will need to go around the device several times applying some force before it comes off. Using the prying tool, pry the silver binding from around tablet from glass edge. You will need to go around the device several times applying some force before it comes off.
    • Using the prying tool, pry the silver binding from around tablet from glass edge. You will need to go around the device several times applying some force before it comes off.

  2. Detach the ribbon cable.
    • Detach the ribbon cable.

  3. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  4. Disconnect the thin connector wire. Note the position both ends go to. There is a similar connection at one end of the wire that could be confused for the correct connection. Incorrectly reconnecting the wire upon re-assembly to this terminal will result in a malfunctioning unit! Disconnect the thin connector wire. Note the position both ends go to. There is a similar connection at one end of the wire that could be confused for the correct connection. Incorrectly reconnecting the wire upon re-assembly to this terminal will result in a malfunctioning unit!
    • Disconnect the thin connector wire. Note the position both ends go to. There is a similar connection at one end of the wire that could be confused for the correct connection. Incorrectly reconnecting the wire upon re-assembly to this terminal will result in a malfunctioning unit!

  5. Remove the 4 screws securing the motherboard. Remove the 4 screws securing the motherboard. Remove the 4 screws securing the motherboard.
    • Remove the 4 screws securing the motherboard.

  6. Replace the original motherboard with the new circuit board. Replace the original motherboard with the new circuit board.
    • Replace the original motherboard with the new circuit board.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Stephanie Wong

于2014年09月26日注册

919 信誉积分

创作了5篇指南

团队

USF Tampa, Team 13-2, Staggers Fall 2014 USF Tampa, Team 13-2, Staggers Fall 2014 的会员

USFT-STAGGERS-F14S13G2

4 名成员

创作了9篇指南

Thanks for this post.

But, that was the speaker module and docking port assembly, not the motherboard!

The title is misleading!

valuesphilippines - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 12

总计 2,728