跳转到主内容

Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement

你所需要的

  1. Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement, Auxiliary Port: 步骤 1 中的图像 1,1
    • Using a nylon spudger or flat plastic opening tool, pry open the back of the device.

    • It is easy to begin this process by starting at the micro SD card insert.

  2. Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 2 中的图像 1,1
    • Using a Phillips head screwdriver, remove the 6 4mm screws holding holding the battery on the device.

  3. Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 3 中的图像 1,3 Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 3 中的图像 2,3 Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 3 中的图像 3,3
    • Gently detach the set of wires clips connecting the battery to the device using a nylon spudger.

    • Remove the battery and set it aside.

  4. Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 4 中的图像 1,1
    • Using a Phillips head screwdriver, remove the 6 4mm screws holding the motherboard in the device.

  5. Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 5 中的图像 1,3 Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 5 中的图像 2,3 Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 5 中的图像 3,3
    • Locate the flex cables attached to the motherboard. Using a nylon spudger, gently detach each flex cable from the motherboard.

    • Be careful when detaching flex cables. Excessive force and sharp tools have the potential to damage these components.

    • Lift the motherboard from the device and set it aside.

  6. Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 6 中的图像 1,3 Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 6 中的图像 2,3 Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 6 中的图像 3,3
    • Locate the yellow brackets at the bottom of the device.

    • Using a phillips head screwdriver, remove the single 4mm screw on each bracket, located on either side of the auxiliary port.

    • Lift the brackets from the device and set them aside.

    • You may need to use a nylon spudger, or any flat tool, to lift the brackets out of their place.

  7. Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 7 中的图像 1,1
    • Using a nylon spudger, or any flat tool, gently pry and lift the small metal covering off of the auxiliary port.

    • This will reveal a rubber covering.

  8. Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 8 中的图像 1,1
    • Using a nylon spudger, or any flat tool, gently pry and lift the small rubber covering to expose the auxiliary port.

    • This will reveal the auxiliary port.

  9. Samsung Galaxy Tab 2 7.0 Auxiliary Port Replacement: 步骤 9 中的图像 1,1
    • Lift the auxiliary port with a nylon spudger.

    • Remove the auxiliary component.

    • It is easiest to lift this piece from the innermost side of the port, opposite of the opening.

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Katija Tarailo

于03/02/17注册

460 声望

创作了3篇指南

团队

IUPUI, Team S3-G1, Harley Spring 2017 IUPUI, Team S3-G1, Harley Spring 2017 的会员

IUPUI-HARLEY-S17S3G1

4 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 5

过去 30 天: 16

总计 2,004