跳转到主内容

修复你的物品

维修的权力

商店

简介

Camera glass covers often are subjected to wear and tear when used. Constant exposure to different environments and mishandling of the phone can lead to damage to the parts of the camera on a mobile phone. Use this guide to replace the camera glass covering of a Samsung Galaxy S8 Active mobile phone.

Before using the guide, be sure to disconnect the phone from any power sources. Make sure the phone is turned off.

  1. Lay phone face down and remove any coverings to the camera area. This way there  are no obstructions to the repair area.
    • Lay phone face down and remove any coverings to the camera area. This way there are no obstructions to the repair area.

  2. Turn on the heat gun and hold it 3-4 inches from the glass for 5 seconds, waving it gently over the area to evenly distribute heat.
    • Turn on the heat gun and hold it 3-4 inches from the glass for 5 seconds, waving it gently over the area to evenly distribute heat.

    • It may be helpful to keep the case on during this step, to avoid excessively heating the adhesive of the back panel.

  3. Gently remove the glass with tweezers. If the adhesive is still strong, utilize the heat gun for another 3-5 seconds, waving it over the area.
    • Gently remove the glass with tweezers.

    • If the adhesive is still strong, utilize the heat gun for another 3-5 seconds, waving it over the area.

  4. Check the surface for any residue or broken glass from previous cover.
    • Check the surface for any residue or broken glass from previous cover.

  5. Center the new glass over the camera lens and lower it to the phone, careful to not scratch the exposed camera lens.
    • Center the new glass over the camera lens and lower it to the phone, careful to not scratch the exposed camera lens.

  6. Press gently on the perimeter of the glass to ensure a strong bond between the glass and the phone, but not pressing hard enough to break the glass.
    • Press gently on the perimeter of the glass to ensure a strong bond between the glass and the phone, but not pressing hard enough to break the glass.

结论

The device should be in working condition after the last step. Be sure to turn on the phone and verify to see if there are any obstructions to the camera view caused by the new glass covering.

Anirudh Iyengar

于2020年02月01日注册

133 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 22

总计 213