跳转到主内容

简介

Samsung has used the same screws in all mobile phone from the S3 - S5 models including the minis. The S6 series brought about new screws and if mixed up screws in too far and causes damage.

  1. 3.2mm S6 / S6 Edge & S7 series screws are 3.2mm.
    • 3.2mm S6 / S6 Edge & S7 series screws are 3.2mm.

  2. S3, S4,  S5  screws are 3.8mm, an extra 0.6mm over the S6 and S7 series.
    • S3, S4, S5 screws are 3.8mm, an extra 0.6mm over the S6 and S7 series.

  3. Using 3.8mm screw around edges S6 / S7 Edge will cause damage to the LCD as per photo. Only ever use 3.2mm phillips head screws on S6 and  S7 screen replacements.
    • Using 3.8mm screw around edges S6 / S7 Edge will cause damage to the LCD as per photo. Only ever use 3.2mm phillips head screws on S6 and S7 screen replacements.

结论

To reassemble your device, follow these instructions in reverse order.

26等其他人完成本指南。

Nick Kane

于2015年02月20日注册

933 信誉积分

撰写一个指南

团队

Smashed IT Auckland Smashed IT Auckland 的会员

Business

5 名成员

创作了2篇指南

Some of the screws in my S6 seem to be even shorter than 3.2 mm . Is that right? And in which holes do those fit? I think I mixed them up...

jellemaris - 回复

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 13

过去的30天: 57

总计 6,730