跳转到主内容

Samsung Galaxy S Vibrant Camera Lens Replacement

你所需要的

  1. Samsung Galaxy S Vibrant Camera Lens Replacement, Battery: 步骤 1 中的图像 1,3 Samsung Galaxy S Vibrant Camera Lens Replacement, Battery: 步骤 1 中的图像 2,3 Samsung Galaxy S Vibrant Camera Lens Replacement, Battery: 步骤 1 中的图像 3,3
    • Locate the small slit on the bottom edge of the device between the back and front cases.

    • Pop the back case off by inserting your finger and pulling the case away from the phone.

    • If necessary (it shouldn't be), use the Plastic Opening Tools to pry the back case off.

  2. Samsung Galaxy S Vibrant Camera Lens Replacement: 步骤 2 中的图像 1,2 Samsung Galaxy S Vibrant Camera Lens Replacement: 步骤 2 中的图像 2,2
    • Remove the battery by pushing the bottom edge of the battery up and away from the phone

    • If you would prefer, you may use the Plastic Opening Tools for this step as well.

  3. Samsung Galaxy S Vibrant Camera Lens Replacement, Midframe: 步骤 3 中的图像 1,1
    • Remove SIM card by pushing down and away from the slot, then pulling it out toward the bottom edge of the phone.

  4. Samsung Galaxy S Vibrant Camera Lens Replacement: 步骤 4 中的图像 1,1
    • Remove the seven 4.5 mm Phillips #00 screws along the perimeter of the phone.

  5. Samsung Galaxy S Vibrant Camera Lens Replacement: 步骤 5 中的图像 1,3 Samsung Galaxy S Vibrant Camera Lens Replacement: 步骤 5 中的图像 2,3 Samsung Galaxy S Vibrant Camera Lens Replacement: 步骤 5 中的图像 3,3
    • Staring near the power button, use a plastic opening tool to disengage the plastic clips securing the midframe.

    • Work carefully, and disengage all of the clips before removing the midframe.

    • The power button and the volume control button on the sides of the phone will fall out when the midframe is removed.

  6. Samsung Galaxy S Vibrant Camera Lens Replacement: 步骤 6 中的图像 1,2 Samsung Galaxy S Vibrant Camera Lens Replacement: 步骤 6 中的图像 2,2
    • Slide the SD card out of its slot.

  7. Samsung Galaxy S Vibrant Camera Lens Replacement, Camera Lens: 步骤 7 中的图像 1,1
    在这个步骤中使用的工具:
    Tweezers
    $4.99
    购买
    • Disconnect the ribbon cable and camera lens by tugging gently at the base of the ribbon cable either by pinching with fingers or with the Tweezers.

    • Only use the pinching method when the camera lens is already broken so as to avoid damage.

结论

To reassemble your device, follow these instructions in reverse order.

团队

Cal Poly, Team 18-37, Regan Winter 2013 Cal Poly, Team 18-37, Regan Winter 2013 的会员

CPSU-REGAN-W13S18G37

4 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 2,479