跳转到主内容

修复你的物品

维修的权力

商店

  1. 这个步骤还没有翻译 帮忙翻译一下

    Grasp the end of the stylus and remove it from its slot in the midframe. Grasp the end of the stylus and remove it from its slot in the midframe.
    • Grasp the end of the stylus and remove it from its slot in the midframe.

  2. 这个步骤还没有翻译 帮忙翻译一下

    Pry with a plastic opening tool, or your fingernail, in the divot to the left of the rear-facing camera, near the power button. Pry with a plastic opening tool, or your fingernail, in the divot to the left of the rear-facing camera, near the power button.
    • Pry with a plastic opening tool, or your fingernail, in the divot to the left of the rear-facing camera, near the power button.

  3. 这个步骤还没有翻译 帮忙翻译一下

    Lift the rear case by the corner nearest the divot and remove it from the phone. Lift the rear case by the corner nearest the divot and remove it from the phone. Lift the rear case by the corner nearest the divot and remove it from the phone.
    • Lift the rear case by the corner nearest the divot and remove it from the phone.

  4. 这个步骤还没有翻译 帮忙翻译一下

    If you have an SD card inserted, use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click. After the click, release the card and it will pop out of its slot. Remove the microSD card.
    • If you have an SD card inserted, use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click.

    • After the click, release the card and it will pop out of its slot.

    • Remove the microSD card.

    • For reassembly, push the microSD card into the slot until it clicks in place.

  5. 这个步骤还没有翻译 帮忙翻译一下

    Insert a plastic opening tool, or your finger, into the notch of the battery compartment and lift the battery upward. Insert a plastic opening tool, or your finger, into the notch of the battery compartment and lift the battery upward.
    • Insert a plastic opening tool, or your finger, into the notch of the battery compartment and lift the battery upward.

  6. 这个步骤还没有翻译 帮忙翻译一下

    Remove the battery from the midframe.
    • Remove the battery from the midframe.

  7. 这个步骤还没有翻译 帮忙翻译一下

    Remove the eleven 4.0 mm Phillips #00 screws securing the midframe to the display assembly.
    • Remove the eleven 4.0 mm Phillips #00 screws securing the midframe to the display assembly.

  8. 这个步骤还没有翻译 帮忙翻译一下

    Insert your plastic opening tool between the midframe and front panel assembly on the side of the phone. Slide the plastic opening tool down the seam. Slide the plastic opening tool down the seam.
    • Insert your plastic opening tool between the midframe and front panel assembly on the side of the phone.

    • Slide the plastic opening tool down the seam.

  9. 这个步骤还没有翻译 帮忙翻译一下

    Continue to run the plastic opening tool down the seam. Continue to run the plastic opening tool down the seam. Continue to run the plastic opening tool down the seam.
    • Continue to run the plastic opening tool down the seam.

  10. 这个步骤还没有翻译 帮忙翻译一下

    Carefully pry around the corner with a plastic opening tool. Carefully pry around the corner with a plastic opening tool.
    • Carefully pry around the corner with a plastic opening tool.

  11. 这个步骤还没有翻译 帮忙翻译一下

    Pry along the top of the phone with a plastic opening tool. Pry along the top of the phone with a plastic opening tool.
    • Pry along the top of the phone with a plastic opening tool.

  12. 这个步骤还没有翻译 帮忙翻译一下

    Push the plastic opening tool down to free the corner of the midframe from the display assembly. Push the plastic opening tool down to free the corner of the midframe from the display assembly.
    • Push the plastic opening tool down to free the corner of the midframe from the display assembly.

  13. 这个步骤还没有翻译 帮忙翻译一下

    Free the clips along the power button side of the phone. Lastly, free the two clips along the top and bottom edge of battery compartment.
    • Free the clips along the power button side of the phone.

    • Lastly, free the two clips along the top and bottom edge of battery compartment.

  14. 这个步骤还没有翻译 帮忙翻译一下

    Lift the display assembly out of the midframe. Lift the display assembly out of the midframe.
    • Lift the display assembly out of the midframe.

终点

49等其他人完成本指南。

Sam Goldheart

于2012年10月18日注册

434,312 信誉积分

创作了547篇指南

团队

iFixit iFixit 的会员

Community

134 名成员

创作了14,939篇指南

There are two hidden clips near battery housing. One inside in upper part of battery housing and the second below battery near antenna.

milankerslager - 回复

How do I fix the glass

Nena Summer Perez - 回复

Very good job you are doing. It is very helpful to us. Thanks for sharing your knowledge to the people my wishes are with you god bless you.

HARDIK PANCHOLI - 回复

very very very useful brother

Arunkrishna T H - 回复

Brilliant Thanks.

michaeleggar6 - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 13

总计 29,864