跳转到主内容

修复你的物品

维修的权力

商店

视频概述

  1. Heat the back cover to melt the strong adhesive sticker underneath.
    • Heat the back cover to melt the strong adhesive sticker underneath.

  2. Try to pull and open a gap between back cover and  frame after heat. Insert into a guitar pick to cut the sticker.
    • Try to pull and open a gap between back cover and frame after heat. Insert into a guitar pick to cut the sticker.

  3. If you do it hardly, you need much more heat especially the edged side.
    • If you do it hardly, you need much more heat especially the edged side.

    • Slipping a playing card through the gap is a good way to loosen up the adhesive.

  4. Remove the back cover. The white stripe is the sticker.
    • Remove the back cover. The white stripe is the sticker.

结论

To reassemble your device, follow these instructions in reverse order.

44等其他人完成本指南。

Sophia

于2014年03月25日注册

42,946 信誉积分

创作了62篇指南

What about putting the one back on?

rcf917 - 回复

will it go back on and stay on without new adhesive?

dfasdfjiun - 回复

I suggest that you take new adhesive, old adhesive is not strong enough to hold back cover.

Witrigs -

You can check this video of put it back battery cover : https://www.youtube.com/watch?v=3HrmeVGY...

Witrigs - 回复

How do I remove the sticky part

Marcelino Lopez - 回复

添加评论

浏览统计数据:

过去的24小时: 11

过去的7天: 43

过去的30天: 168

总计 105,407