跳转到主内容

修复你的物品

维修的权力

商店

简介

This guide will walk you through the process of replacing a not working motherboard in a Samsung Galaxy J3V.

  1. Place your thumb on the top left corner and pry the tab open and lift off the back cover. Place your thumb on the top left corner and pry the tab open and lift off the back cover. Place your thumb on the top left corner and pry the tab open and lift off the back cover.
    • Place your thumb on the top left corner and pry the tab open and lift off the back cover.

  2. Remove the ten 2.0 mm screws with the Phillips #J000 screwdriver. Remove the ten 2.0 mm screws with the Phillips #J000 screwdriver. Remove the ten 2.0 mm screws with the Phillips #J000 screwdriver.
    • Remove the ten 2.0 mm screws with the Phillips #J000 screwdriver.

  3. Use a small suction cup to pull the screen up. Then slip a small plastic opening tool under the screen to pry it upwards. If this is the first time the screen is being removed then there will be adhesive around the edges of the screen. It may be difficult to remove the screen because of this adhesive seal and it is going to take a few tries and some force to pry the entire screen off. If this is the first time the screen is being removed then there will be adhesive around the edges of the screen. It may be difficult to remove the screen because of this adhesive seal and it is going to take a few tries and some force to pry the entire screen off.
    • Use a small suction cup to pull the screen up. Then slip a small plastic opening tool under the screen to pry it upwards.

    • If this is the first time the screen is being removed then there will be adhesive around the edges of the screen. It may be difficult to remove the screen because of this adhesive seal and it is going to take a few tries and some force to pry the entire screen off.

  4. Use tweezers to flip tab of the front camera to remove it. Use tweezers to flip tab of the front camera to remove it. Use tweezers to flip tab of the front camera to remove it.
    • Use tweezers to flip tab of the front camera to remove it.

  5. Remove connector tab with spudger then carefully remove headphone jack with tweezers. Remove connector tab with spudger then carefully remove headphone jack with tweezers. Remove connector tab with spudger then carefully remove headphone jack with tweezers.
    • Remove connector tab with spudger then carefully remove headphone jack with tweezers.

  6. Remove these connectors from the motherboard with spudger. Remove these connectors from the motherboard with spudger.
    • Remove these connectors from the motherboard with spudger.

  7. Carefully use the spudger to pry the motherboard out of the plastic tabs. Carefully use the spudger to pry the motherboard out of the plastic tabs.
    • Carefully use the spudger to pry the motherboard out of the plastic tabs.

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Carry Corrales

于2017年09月28日注册

711 信誉积分

创作了5篇指南

团队

USF Tampa, Team S3-G3, Nance Fall 2017 USF Tampa, Team S3-G3, Nance Fall 2017 的会员

USFT-NANCE-F17S3G3

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 15

总计 1,142