跳转到主内容

Samsung Galaxy J3 Eclipse Display Assembly Replacement

你所需要的

  1. Samsung Galaxy J3 Eclipse Display Assembly Replacement, Display Assembly: 步骤 1 中的图像 1,1
    • Use a heat gun or hair dryer to heat up the front edges of the phone for about two minutes. Stay approximately six inches away from the screen to prevent phone damage.

    • Do not apply heat to any one edge of the phone for longer than a few seconds. Instead, use a continuous motion around the phone's edges.

  2. Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 2 中的图像 1,2 Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 2 中的图像 2,2
    在这个步骤中使用的工具:
    Plastic Cards
    $2.99
    购买
    • While the screen adhesive is still warm and flexible, insert a pry tool or plastic card between the glass display and the frame of the phone.

    • Slowly slide another pry tool around all the edges of the phone in order to break the adhesive's bond to the display.

    • When using the pry tool, do not use too much force or the phone's internals could be damaged.

    • Do not insert your tool more than 1cm into the top edge of the phone to avoid damaging the fragile cables.

  3. Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 3 中的图像 1,3 Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 3 中的图像 2,3 Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 3 中的图像 3,3
    • Gently lift lower side and loosen all edges to hinge screen up from bottom.

    • Do not try to completely remove the display from the frame yet. Simply try to loosen up all the edges.

  4. Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 4 中的图像 1,3 Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 4 中的图像 2,3 Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 4 中的图像 3,3
    • Use your prying tool to slowly pry up on the bottom right corner of the white cable guard, exposing a thin ribbon cable connector.

  5. Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 5 中的图像 1,3 Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 5 中的图像 2,3 Samsung Galaxy J3 Eclipse Display Assembly Replacement: 步骤 5 中的图像 3,3
    • Pry up the ribbon cable connector revealed from under the cable guard and remove the display from the device.

    • Clean the residue from the phone edges before re-assembling phone with new screen.

结论

To reassemble your device, connect all cables, apply fresh screen adhesive and follow these instructions in reverse order.

12等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 3

过去 30 天: 13

总计 3,804