跳转到主内容

简介

Use this guide to replace your motherboard. When following these steps ensure that you do not remove the glass screen from the digitizer during step four.

  1. Insert a finger nail or plastic opening tool between the back cover and the device.
    • Insert a finger nail or plastic opening tool between the back cover and the device.

    • Gently pry the rear cover off of the back of the phone.

  2. Using a finger, pull the SIM card down out of its slot. Remove the SIM card.
    • Using a finger, pull the SIM card down out of its slot.

    • Remove the SIM card.

    • The pictured device is missing the SIM card and battery.

  3. Using a Phillips #00 screwdriver remove the eleven 3 mm screws.
    • Using a Phillips #00 screwdriver remove the eleven 3 mm screws.

  4. Insert a plastic opening tool between the screen and the back of the device. Starting at the bottom of the device, gently slide the tool along the edges of the screen. Gently pry the main assembly from the midframe of the device.
    • Insert a plastic opening tool between the screen and the back of the device.

    • Starting at the bottom of the device, gently slide the tool along the edges of the screen.

    • Gently pry the main assembly from the midframe of the device.

    • When removing the main assembly, pry gently so as to not crack the glass screen or break any clips within the device.

  5. Use the flat edge of a spudger to disconnect the ear speaker connector. Use the flat edge of a spudger to disconnect the ear speaker connector.
    • Use the flat edge of a spudger to disconnect the ear speaker connector.

  6. Use the flat end of a spudger disconnect the digitizer connector. Use the flat end of a spudger disconnect the digitizer connector.
    • Use the flat end of a spudger disconnect the digitizer connector.

  7. Use the flat end of a spudger disconnect the front-facing camera cable connector. Use the flat end of a spudger disconnect the front-facing camera cable connector.
    • Use the flat end of a spudger disconnect the front-facing camera cable connector.

  8. Remove the front-facing camera. Remove the front-facing camera.
    • Remove the front-facing camera.

  9. Use the flat end of a spudger to gently pry under the motherboard. Remove the motherboard. Remove the motherboard.
    • Use the flat end of a spudger to gently pry under the motherboard.

    • Remove the motherboard.

  10. Use the flat end of a spudger to disconnect the rear camera cable connector.
    • Use the flat end of a spudger to disconnect the rear camera cable connector.

  11. Remove the rear camera. Remove the rear camera.
    • Remove the rear camera.

结论

To reassemble your device, follow these instructions in reverse order.

19等其他人完成本指南。

Sean Kramer

于2018年02月14日注册

1,272 信誉积分

创作了6篇指南

团队

USF Tampa, Team S5-G4, Eyestone Spring 2018 USF Tampa, Team S5-G4, Eyestone Spring 2018 的会员

USFT-EYESTONE-S18S5G4

3 名成员

创作了6篇指南

can you plz give use a amazon link to part

Sean Gynn - 回复

Very good illustration..where can I get a motherboard?

Isaac Samuels - 回复

Where can I get a motherboard for this phone Samsung J100?

Isaac Samuels - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 10

过去的30天: 35

总计 5,052