1. Insert a finger nail or plastic opening tool between the back cover and the device.
    • Insert a finger nail or plastic opening tool between the back cover and the device.

    • Gently pry the rear cover off of the back of the phone.

    添加评论

  2. Using a finger, pull the SIM card down out of its slot.
    • Using a finger, pull the SIM card down out of its slot.

    • Remove the SIM card.

    • The pictured device is missing the SIM card and battery.

    添加评论

    • Using a Phillips #00 screwdriver remove the eleven 3 mm screws.

    添加评论

    • Insert a plastic opening tool between the screen and the back of the device.

    • Starting at the bottom of the device, gently slide the tool along the edges of the screen.

    • Gently pry the main assembly from the midframe of the device.

    • When removing the main assembly, pry gently so as to not crack the glass screen or break any clips within the device.

    添加评论

    • Using the flat end of a spudger, disconnect the digitizer cable connector.

    添加评论

    • Using a plastic opening tool pry between silver digitizer and black back piece.

    • Slowly slide plastic opening tool around the screen to loosen the adhesive.

    • Be careful not to tear the digitizer cable when threading it through the plastic housing.

    添加评论

    • Carefully separate display assembly from the plastic housing.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

Sean Kramer

于2018年02月14日注册

927 信誉积分

创作了6篇指南

团队

USF Tampa, Team S5-G4, Eyestone Spring 2018 USF Tampa, Team S5-G4, Eyestone Spring 2018 的会员

USFT-EYESTONE-S18S5G4

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 6

过去的7天: 37

过去的30天: 145

总计 948