跳转到主内容

修复你的物品

维修的权力

商店

  1. Begin removing the 3/16" screws for the device.
    • Begin removing the 3/16" screws for the device.

  2. Turn the device and remove the additional 3/16" screws.
    • Turn the device and remove the additional 3/16" screws.

  3. Turn the device and remove the additional 3/16" screw.
    • Turn the device and remove the additional 3/16" screw.

  4. Take the white cover plate off. Take the white cover plate off. Take the white cover plate off.
    • Take the white cover plate off.

  5. Using the plastic opening tools, pry open the camera from the bottom.
    • Using the plastic opening tools, pry open the camera from the bottom.

    • This may require a moderate use of force because of the sealing glue.

  6. Gently pull the connector away from the motherboard.
    • Gently pull the connector away from the motherboard.

  7. Unscrew the motherboard's screws. There are 4 3/32" screws and 3 5/32" screws.
    • Unscrew the motherboard's screws. There are 4 3/32" screws and 3 5/32" screws.

  8. Unscrew the lens' screws. There are 1 black 4/32" screw, 3 3/16" black screws, and 2 white 5/32" screws.
    • Unscrew the lens' screws. There are 1 black 4/32" screw, 3 3/16" black screws, and 2 white 5/32" screws.

  9. Pull these connectors away from motherboard.
    • Pull these connectors away from motherboard.

  10. Lift the motherboard and lens out of the case.
    • Lift the motherboard and lens out of the case.

结论

To reassemble your device, follow these instructions in reverse order.

10等其他人完成本指南。

Richard Hicks

于2015年01月13日注册

1,241 信誉积分

创作了4篇指南

团队

USF Tampa, Team 1-3, Sullivan Winter 2015 USF Tampa, Team 1-3, Sullivan Winter 2015 的会员

USFT-SULLIVAN-W15S1G3

3 名成员

创作了4篇指南

Hey mate, what do you do after the motherboard replacement? Just turn the camera on? Do you need to do a master reset?

Sam - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 4,639