跳转到主内容

简介

Use this guide to remove the battery in order to access other parts of the phone.

  1. On the back panel of the phone, find the slot that is on the top left side next to the flashlight. Insert your fingernail or prying tool into the slot and lift up to slightly open the top left corner of the back panel. Slide your fingernail or prying tool around the outer edge of the back panel to fully release it from the phone.
    • On the back panel of the phone, find the slot that is on the top left side next to the flashlight.

    • Insert your fingernail or prying tool into the slot and lift up to slightly open the top left corner of the back panel.

    • Slide your fingernail or prying tool around the outer edge of the back panel to fully release it from the phone.

  2. Make sure the device is powered down before moving forward. Since the NFC antenna is glued to the battery, make sure the replacement also includes one.
    • Make sure the device is powered down before moving forward.

    • Since the NFC antenna is glued to the battery, make sure the replacement also includes one.

    • Locate the slot at the base of the battery and insert your thumb.

    • Push slightly toward the battery and out, away from the phone to free the battery.

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

Jon Brausch

于2015年01月20日注册

1,305 信誉积分

创作了2篇指南

团队

Cal Poly, Team 20-17, Maness Winter 2015 Cal Poly, Team 20-17, Maness Winter 2015 的会员

CPSU-MANESS-W15S20G17

4 名成员

创作了5篇指南

2条评论

Not even a full picture of the battery agh! I need to know if I can use note 4 battery

Alex Andrei - 回复

Please also make sure that replacing the battery with a cheap knock off will disable NFC since the antenna is glued to the battery.

vargabp0 - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 9

总计 4,265