修复你的物品 社区 商店

Samsung Galaxy A50 Back Cover Replacement

简介

Use this guide to replace the back cover of your Samsung Galaxy A50.

You’ll need replacement adhesive to reattach the back cover when reassembling the device.

你所需要的

  1. Samsung Galaxy A50 Back Cover Replacement, Back Cover: 步骤 1 中的图像 1，1

    • Start by switching off your phone.

    • Heat an iOpener and apply it to the back cover to soften the adhesive.

    • The adhesive of the Samsung Galaxy A50 is very strong. A hair dryer, heat gun, or hot plate may also be used if you aren't able to open the device with the iOpener. Be careful not to overheat the phone—the AMOLED display and internal battery are both susceptible to heat damage.

    编辑

  2. Samsung Galaxy A50 Back Cover Replacement: 步骤 2 中的图像 1，3 Samsung Galaxy A50 Back Cover Replacement: 步骤 2 中的图像 2，3 Samsung Galaxy A50 Back Cover Replacement: 步骤 2 中的图像 3，3

    • Insert an opening pick at the bottom of your phone near the USB-C port.

    • If you can't get between the back cover and midframe with your opening pick, you can use a suction handle or strong tape to pull up the back cover to create a gap.

    • Slide the opening pick to the bottom left corner.

    编辑

  4. Samsung Galaxy A50 Back Cover Replacement: 步骤 3 中的图像 1，2 Samsung Galaxy A50 Back Cover Replacement: 步骤 3 中的图像 2，2

    • Insert a second opening pick and slide it from the bottom to the top left corner to cut the adhesive.

    • If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.

    • Leave the opening picks in place to prevent the adhesive from resealing.

    编辑

  5. Samsung Galaxy A50 Back Cover Replacement: 步骤 4 中的图像 1，3 Samsung Galaxy A50 Back Cover Replacement: 步骤 4 中的图像 2，3 Samsung Galaxy A50 Back Cover Replacement: 步骤 4 中的图像 3，3

    • Insert a third opening pick under the top left corner of the back cover.

    • Slide the opening pick along the top edge of the phone.

    • Leave the opening pick in the top right corner to prevent the adhesive from resealing.

    编辑

  6. Samsung Galaxy A50 Back Cover Replacement: 步骤 5 中的图像 1，3 Samsung Galaxy A50 Back Cover Replacement: 步骤 5 中的图像 2，3 Samsung Galaxy A50 Back Cover Replacement: 步骤 5 中的图像 3，3

    • Insert a fourth opening pick under the top right corner of the back cover.

    • Slide the tip of the opening pick along the side of the phone to the bottom right corner to cut the adhesive.

    • Leave the opening pick in the bottom right corner to prevent the adhesive from resealing.

    编辑

  7. Samsung Galaxy A50 Back Cover Replacement: 步骤 6 中的图像 1，1

    • Remove the back cover.

    • After installing the back cover, apply strong, steady pressure to your phone for several minutes to help the adhesive form a good bond—a stack of heavy books works well.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.
Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%). Secure the new back cover with pre-cut adhesive or double-sided adhesive tape.

16等其他人完成本指南。

作者

与1其他贡献者

Adriana Zwink

于12/18/19注册

48,256 声望

创作了167篇指南

徽章: 35

+ 32更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,817篇指南

一条评论

Thank you for this write up, I wanted to insure there were no connections and overall it's just something I practice to make sure to double check rather a back cover has any hidden surprises, Trust me I've learned from experience not to Assume anything, lol. Take care, and thanks

Matthew Newton - 回复

添加评论

浏览统计数据:

过去 24 小时： 8

过去 7 天： 61

过去 30 天： 271

总计 19,519