配件

无需配件。

  1. Open the tray by pressing the eject button
    • Open the tray by pressing the eject button

    • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

    添加评论

  2. Press the eject button to insert the tray
    • Press the eject button to insert the tray

    • After the tray is closed unplug DVD player

    添加评论

    • Unscrew the 3 screws in the back.

    添加评论

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Pull the outer case upward and then towards you.

    添加评论

    • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

    添加评论

    • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

    添加评论

    • Locate the white clip that attaches the cord to the motherboard

    • Grasp clip and squeeze to release

    • Lift up and remove power cord

    • Slide cord mount from outer case

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Evan Domingue

于2011年01月28日注册

398 信誉积分

创作了3篇指南

团队

Cal Poly, Team 3-30, Regan Winter 2011 Cal Poly, Team 3-30, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G30

4 名成员

创作了8篇指南

where can I get a replacement cord?

Bill Cavanaugh - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 16

总计 2,776