跳转到主内容

简介

This guide illustrates how to remove the Samsung Chromebook 3 XE500C13-K02US battery. You will need to open the device’s back panel as the battery is located inside the case.

  1. Place the laptop back cover facing up to expose the screws. Using a Phillips #00 screwdriver, remove nine 4.6mm screws from the back casing.
    • Place the laptop back cover facing up to expose the screws.

    • Using a Phillips #00 screwdriver, remove nine 4.6mm screws from the back casing.

  2. Use an iFixit opening tool to wedge in between the case and body of the laptop. Once the tool is wedged in between the case and laptop, slide it around the entire laptop's edge to disengage the retaining clips.
    • Use an iFixit opening tool to wedge in between the case and body of the laptop.

    • Once the tool is wedged in between the case and laptop, slide it around the entire laptop's edge to disengage the retaining clips.

    • You should hear a popping sound as you slide the iFixit opening tool around the laptop.

  3. Remove the cover exposing the inside of the laptop. Remove the cover exposing the inside of the laptop.
    • Remove the cover exposing the inside of the laptop.

  4. Remove the four 4.6mm screws with the Phillips #00 screwdriver. Remove the four 4.6mm screws with the Phillips #00 screwdriver.
    • Remove the four 4.6mm screws with the Phillips #00 screwdriver.

  5. Use the spudger to pry underneath the cable and gently lift the connector up. Use the spudger to pry underneath the cable and gently lift the connector up. Use the spudger to pry underneath the cable and gently lift the connector up.
    • Use the spudger to pry underneath the cable and gently lift the connector up.

  6. Lift the battery up and out of the case.
    • Lift the battery up and out of the case.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Mick McCarty

于2019年03月18日注册

948 信誉积分

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 9

过去的30天: 30

总计 895