简介

Cracked frame? Use this guide to repair your Captivate's rear case.

配件

无需配件。

Remove the back cover by pressing on  the bottom section of the phone and sliding the bottom piece downward.
  • Remove the back cover by pressing on the bottom section of the phone and sliding the bottom piece downward.

  • Lift up the back cover.

添加评论

Place your finger on the bottom of the battery and lift to remove.
  • Place your finger on the bottom of the battery and lift to remove.

添加评论

  • Replace the old battery with the new one.

添加评论

  • Insert the spudger underneath the bottom section of the phone.

  • Gently lift and push the spudger to slide the bottom section down to reveal two hidden screws.

添加评论

  • Remove the six 4.5mm #000 Phillips screws.

添加评论

  • Starting at a bottom corner, use the spudger to separate the rear case from the front display.

  • Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.

  • Be careful when detaching the top. Free each side, stopping short of the center of the cover. Apply backward pressure on both corners with a finger applying pressure on the center, and slide the whole back cover toward the bottom of the device. Note: forcing the cover can result in cracked plastic.

添加评论

  • Separate the rear case from the phone.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

12等其他人完成本指南。

Christopher

于2011年10月06日注册

643 信誉积分

创作了4篇指南

团队

Cal Poly, Team 20-25, Maness Fall 2011 Cal Poly, Team 20-25, Maness Fall 2011 的会员

CPSU-MANESS-F11S20G25

3 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 3,286