跳转到主内容

Samsung Captivate Glide QWERTY Keyboard Replacement

你所需要的

  1. Samsung Captivate Glide QWERTY Keyboard Replacement, Motherboard: 步骤 1 中的图像 1,3 Samsung Captivate Glide QWERTY Keyboard Replacement, Motherboard: 步骤 1 中的图像 2,3 Samsung Captivate Glide QWERTY Keyboard Replacement, Motherboard: 步骤 1 中的图像 3,3
    • Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.

  2. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 2 中的图像 1,2 Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 2 中的图像 2,2
    • Remove battery with plastic opening tool or finger.

  3. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 3 中的图像 1,2 Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 3 中的图像 2,2
    • Remove the seven screws from backplate using the #00 screwdriver.

  4. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 4 中的图像 1,3 Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 4 中的图像 2,3 Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 4 中的图像 3,3
    • Remove the back plate using the plastic opening tool.

    • There is a lip on each side, and both must be pried up.

    • You can work your way around the edges after prying the two sides.

  5. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 5 中的图像 1,2 Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 5 中的图像 2,2
    • Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone.

  6. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 6 中的图像 1,1
    • Disconnect the antenna cable from the motherboard using tweezers.

  7. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 7 中的图像 1,1
    • Remove the single screw connecting the motherboard to the base of the phone by using the #00 Phillips screwdriver.

  8. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 8 中的图像 1,2 Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 8 中的图像 2,2
    • Lift the motherboard out of the base of the phone.

  9. Samsung Captivate Glide QWERTY Keyboard Replacement, QWERTY Keyboard: 步骤 9 中的图像 1,2 Samsung Captivate Glide QWERTY Keyboard Replacement, QWERTY Keyboard: 步骤 9 中的图像 2,2
    • Remove the eight screws using the #00 screw driver.

  10. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 10 中的图像 1,2 Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 10 中的图像 2,2
    • Remove blue tape using the tweezers.

  11. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 11 中的图像 1,1
    • Remove screws using the #00 screwdriver.

  12. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 12 中的图像 1,1
    • Using the plastic opening tool, remove the back plate by prying on the four main points.

    • You may encounter difficultly at certain points. Work the plastic opening tool along the edge to keep back plate from closing again.

  13. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 13 中的图像 1,1
    • Lift the back plate.

    • To remove the attached flex cable, gently peel the flex cable connecting to the back plate.

    • Flex cable is attached to the back plate with an adhesive.

  14. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 14 中的图像 1,3 Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 14 中的图像 2,3 Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 14 中的图像 3,3
    • Slide the flex cable through the slot.

    • Set the front plate down. Now you have free access to the keyboard.

  15. Samsung Captivate Glide QWERTY Keyboard Replacement: 步骤 15 中的图像 1,1
    • Manually lift the keyboard and replace with new keyboard.

    • Make sure the new keyboard is placed with the keyboard letters facing down, and the white back facing up.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Jessica Martinez

于09/25/14注册

260 声望

创作了2篇指南

团队

USF Tampa, Team 5-3, Mcgee Fall 2014 USF Tampa, Team 5-3, Mcgee Fall 2014 的会员

USFT-MCGEE-F14S5G3

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 411