跳转到主内容

Samsung Captivate Antenna Cable Replacement

你所需要的

  1. Samsung Captivate Antenna Cable Replacement, Battery: 步骤 1 中的图像 1,1
    • Remove the back cover by pressing on the bottom section of the phone and sliding the bottom piece downward.

    • Lift up the back cover.

  2. Samsung Captivate Antenna Cable Replacement: 步骤 2 中的图像 1,1
    • Place your finger on the bottom of the battery and lift to remove.

  3. Samsung Captivate Antenna Cable Replacement: 步骤 3 中的图像 1,1
    • Replace the old battery with the new one.

  4. Samsung Captivate Antenna Cable Replacement, Rear Case: 步骤 4 中的图像 1,1
    • Insert the spudger underneath the bottom section of the phone.

    • Gently lift and push the spudger to slide the bottom section down to reveal two hidden screws.

  5. Samsung Captivate Antenna Cable Replacement: 步骤 5 中的图像 1,1
    • Remove the six 4.5mm #000 Phillips screws.

  6. Samsung Captivate Antenna Cable Replacement: 步骤 6 中的图像 1,3 Samsung Captivate Antenna Cable Replacement: 步骤 6 中的图像 2,3 Samsung Captivate Antenna Cable Replacement: 步骤 6 中的图像 3,3
    • Starting at a bottom corner, use the spudger to separate the rear case from the front display.

    • Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.

    • Be careful when detaching the top. Free each side, stopping short of the center of the cover. Apply backward pressure on both corners with a finger applying pressure on the center, and slide the whole back cover toward the bottom of the device. Note: forcing the cover can result in cracked plastic.

  7. Samsung Captivate Antenna Cable Replacement: 步骤 7 中的图像 1,1
    • Separate the rear case from the phone.

  8. Samsung Captivate Antenna Cable Replacement, Antenna Cable: 步骤 8 中的图像 1,2 Samsung Captivate Antenna Cable Replacement, Antenna Cable: 步骤 8 中的图像 2,2
    • Use a spudger tool to pry up the antenna cable from the connector on the motherboard.

    • Pry up the other end of the cable from the connector on the antenna array.

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

Drew Bentz

于09/22/11注册

565 声望

创作了5篇指南

团队

Cal Poly, Team 20-25, Maness Fall 2011 Cal Poly, Team 20-25, Maness Fall 2011 的会员

CPSU-MANESS-F11S20G25

3 名成员

创作了9篇指南

2条评论

Quick question, is this the antenna for wifi or cellular network?

Michael Perdomo - 回复

This is actually just the cable that connects the motherboard to the antenna array. I believe the antenna array that it connects to is for WiFi though.

Drew Bentz -

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 15

总计 3,612