简介

If there are any issues connecting to the WiFi with the device that can not seem to fixed, this simple guide explains how to replace the module. The only tool required is a #1 Phillips head screwdriver.

配件

无需配件。

  1. Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.
    • Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.

    • Tilt the back of the top cover forward to remove from chassis.

  2. Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.
    • Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.

  3. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Disconnect the WiFi board cable connector from the main logic board
    • Disconnect the WiFi board cable connector from the main logic board

  5. Using a #1 Phillips head screwdriver, remove the 7.5 mm screw.
    • Using a #1 Phillips head screwdriver, remove the 7.5 mm screw.

    • Slightly tilt the WiFi module sideways to remove from chassis.

结论

To reassemble your device, follow these instructions in reverse order.

Louis McKean

于2017年10月18日注册

501 信誉积分

创作了5篇指南

团队

USF Tampa, Team S1-G21, Cagle Fall 2017 USF Tampa, Team S1-G21, Cagle Fall 2017 的会员

USFT-CAGLE-F17S1G21

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 67