简介

The back speaker emits noise for your phone's ringtones, music, sound effects, and speakerphone conversations. Installing a new back speaker may alleviate distorted or missing noise.

配件

无需配件。

  1. To remove the back casing, firmly press down and push towards the bottom of the phone.
    • To remove the back casing, firmly press down and push towards the bottom of the phone.

    添加评论

  2. With the casing removed, lift the battery from the indicated indentation.
    • With the casing removed, lift the battery from the indicated indentation.

    添加评论

    • From here, you can now access the SIM card and model/serial numbers.

    添加评论

    • Using the Phillips #00 screwdriver, remove the four indicated screws (4.5 mm).

    添加评论

    • Press the pointed edge of the spudger into the side of the two rubber plugs in order to lift and remove them from the top of the phone.

    • Then, using the Phillips #00 screwdriver, remove the two indicated Phillip screws (6.5 mm).

    添加评论

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • To remove the SIM card, start by pressing the top of the card and push down and away towards the bottom of the phone. Then, as indicated, pull the SIM card out.

    添加评论

    • Begin to slowly lift the back casing of the phone. You should hear a snap when the casing is released.

    • The power, volume, and camera buttons may fall out when separating the front and back casing.

    添加评论

    • Your casing should be separated and the three loose buttons put to the side.

    • Be aware of the wiring on the top of the phone. Make sure not to pull it apart when separating the case.

    添加评论

    • Slowly remove the back casing by gently pulling the ribbon connection.

    添加评论

    • Gently pull on the wires to remove the front casing.

    添加评论

    • Your front casing and front speaker are now released.

    添加评论

    • Locate the back speaker.

    添加评论

    • Use the flat edge of the spudger to gently pry and remove the speaker.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Breanne

于2012年04月12日注册

187 信誉积分

创作了5篇指南

团队

Cal Poly, Team 6-24, Amido Spring 2012 Cal Poly, Team 6-24, Amido Spring 2012 的会员

CPSU-AMIDO-S12S6G24

3 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 771