修复你的物品 社区 商店

Saeco Minuto brewing unit gasket replacement

简介

The gasket of the brewing unit has to withstand heavy usage. Especially the large O-Ring on the piston needs replacing from time to time. Follow this guide to replace the gasket.

你所需要的

  1. Saeco Minuto brewing unit gasket replacement, Brewing unit gasket: 步骤 1 中的图像 1，2 Saeco Minuto brewing unit gasket replacement, Brewing unit gasket: 步骤 1 中的图像 2，2

    • Open the hatch on the side panel and remove the brewing unit.

    翻译

  2. Saeco Minuto brewing unit gasket replacement: 步骤 2 中的图像 1，1

    • The spout for the hot coffee is located on the top of the brewing unit. It is fastened with two screws. Underneath is the crema valve. It consists of a spring and a little glass ball. Make sure the spring is reinserted with the thin end touching the glass ball when re-assembling.

    • Remove the two Torx T10 screws on the crema valve.

    • Lift off the crema valve minding the spring and the glass ball.

    翻译

  4. Saeco Minuto brewing unit gasket replacement: 步骤 3 中的图像 1，1

    • The upper piston is held in place in the frame with four locking pawls. Push down all four latches with a spudger, then remove the piston by pushing it downward.

    • If you want to replace the gasket, you can do this now and re-assemble the device and stop here. However, a general maintenance of the brewing unit is strongly recommended.

    • Unscrew the Torx T10 screw on the brewing sieve and remove it.

    翻译

  5. Saeco Minuto brewing unit gasket replacement: 步骤 4 中的图像 1，3 Saeco Minuto brewing unit gasket replacement: 步骤 4 中的图像 2，3 Saeco Minuto brewing unit gasket replacement: 步骤 4 中的图像 3，3

    • There are three Torx T10 screws in deep blind holes that hold together the two parts of the brewing unit. Unscrew them and lift off the upper side panel.

    翻译

  6. Saeco Minuto brewing unit gasket replacement: 步骤 5 中的图像 1，2 Saeco Minuto brewing unit gasket replacement: 步骤 5 中的图像 2，2

    • Now you can disassemble the brewing unit into its three main parts: the brewing unit and the two side panels.

    翻译

  7. Saeco Minuto brewing unit gasket replacement: 步骤 6 中的图像 1，2 Saeco Minuto brewing unit gasket replacement: 步骤 6 中的图像 2，2

    • You can push out the lower piston from the brewing unit if you snap the deflection lever out of its socket with a screw driver.

    • Clean all parts with very hot water and dishwasher liquid.

    • Grease all moving parts with food grade silicone fat. Dont forget the tracks in the side panels.

    翻译
结论

Follow the steps in reverse order to reassemble your device.

另外一个人完成了本指南。

由衷感谢以下译者：

de en

100%

Annika Faelker

jana°

VauWeh

这些译者帮助我们修补全世界！ 您也想加入吗？
开始翻译 ›

作者

与1其他贡献者

VauWeh

于10/19/15注册

201,568 声望

创作了246篇指南

徽章: 44

+ 41更多徽章

团队

Repair is War on Entropy Repair is War on Entropy 的会员

Community

24 名成员

创作了1,097篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 58

总计 3,564