修复你的物品 社区 商店

SEGA Genesis Flashback Back Cover Replacement

简介

This guide will help you remove the back cover of your device. You’ll need a Phillips #000 screwdriver to complete this guide.

你所需要的

  1. SEGA Genesis Flashback Back Cover Replacement, Back Cover: 步骤 1 中的图像 1，1

    • Scratch off the right-hand side of the sticker at the center of the bottom case using the spudger until the screw is visible.

    • Remove this screw with the Phillips #000 screwdriver.

    编辑

  2. SEGA Genesis Flashback Back Cover Replacement: 步骤 2 中的图像 1，1

    • Remove the two visible screws on the bottom with the Phillips #000 screwdriver.

    编辑

  4. SEGA Genesis Flashback Back Cover Replacement: 步骤 3 中的图像 1，2 SEGA Genesis Flashback Back Cover Replacement: 步骤 3 中的图像 2，2

    • Use your fingers to peel off the four corner rubber feet on the bottom.

    • Use the Phillips #000 screwdriver to remove the four screws beneath the rubber feet.

    编辑

  5. SEGA Genesis Flashback Back Cover Replacement: 步骤 4 中的图像 1，1

    • Flip the case to its upright position.

    • Place one hand on the bottom plate of the case and one on the top plate. Gently pull apart the two plates by tilting the top plate about the front of the device. Treat the front of the device as a hinge.

    • Remove the back cover from the device.

    • Be sure not to rip the wire connection of the LED bulb that is still connected to the bottom plate.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与5其他贡献者

Viet Nguyen

于04/17/18注册

220 声望

创作了2篇指南

徽章: 9

+ 6更多徽章

团队

Cal Poly, Team S24-G12, Maness Spring 2018 Cal Poly, Team S24-G12, Maness Spring 2018 的会员

CPSU-MANESS-S18S24G12

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 2

总计 521