跳转到主内容

简介

This guide will help you replace the back cover of you controller. You’ll only need a Phillips #000 screwdriver to complete this guide.

  1. SEGA Genesis Flashback  Controller Back Cover Replacement, Controller Back Cover: 步骤 1 中的图像 1,3 SEGA Genesis Flashback  Controller Back Cover Replacement, Controller Back Cover: 步骤 1 中的图像 2,3 SEGA Genesis Flashback  Controller Back Cover Replacement, Controller Back Cover: 步骤 1 中的图像 3,3
    • Remove the screws on the back of the controller with the Phillips #000 screwdriver.

    • Hold the controller with the bottom plate facing up, gently remove the top plate that is connected to the motherboard of the controller. Set the top plate aside.

    • Be sure to separate the two plates with the bottom facing up, to keep the buttons from falling out.

    • Place screws on magnetic project mat to avoid losing any screws.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Omar Shorab

于2018年04月23日注册

261 声望分

创作了2篇指南

团队

Cal Poly, Team S24-G12, Maness Spring 2018 Cal Poly, Team S24-G12, Maness Spring 2018 的会员

CPSU-MANESS-S18S24G12

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 11

总计 285