简介
This replacement guild will should how to replace the motor in the Ryobi RJ1861V.
你所需要的
-
-
Use a Torx T5 screwdriver to remove the single 8 mm screw securing the shoe.
-
-
-
-
The motor is divided into two sections, one attached to the gear case and one attached to the handle.
-
This arrow indicates the section attached to the gear case.
-
This arrow indicates the section attached to the handle.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。