Royal Heat RS-100 Fuse Replacement - iFixit 维修指南

简介

Check the fuse when the current flow through the power cord, but not through the heater coil.

你所需要的

步骤 1 Panel

Royal Heat RS-100 Fuse Replacement, Panel: 步骤 1 中的图像 1，1

Unplug the power cord.
Flip the device over so the bottom is facing up.
Remove the two 10mm screws holding the back panel using a Phillips #2 screwdriver.

步骤 2

Royal Heat RS-100 Fuse Replacement: 步骤 2 中的图像 1，3

Royal Heat RS-100 Fuse Replacement: 步骤 2 中的图像 2，3

Royal Heat RS-100 Fuse Replacement: 步骤 2 中的图像 3，3

Place the Flathead Screw driver parallel with the gap between the back and the heater body, then twist until the two parts of panel are separated. You may have to do this on four sides of the panel.
Remove the front panel by pulling them apart. The front panel should come out easily.

步骤 3

Royal Heat RS-100 Fuse Replacement: 步骤 3 中的图像 1，1

Remove the two dial caps from the two switches by lifting them up.

步骤 4 Fuse

Royal Heat RS-100 Fuse Replacement, Fuse: 步骤 4 中的图像 1，2

Royal Heat RS-100 Fuse Replacement, Fuse: 步骤 4 中的图像 2，2

Do not pry from the middle of the fuse because some fuses are made of glass.
Pry one end of the fuse from the bracket until it is separated from the holder.
Remove the fuse by lifting it up.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Long Tran

于10/14/13注册

205 声望

创作了2篇指南

+ 6更多徽章

团队

Cal Poly, Team 11-35, Amido Fall 2013 Cal Poly, Team 11-35, Amido Fall 2013 的会员

CPSU-AMIDO-F13S11G35

4 名成员

创作了13篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 586