Roller Skate Double Action Cushion Replacement - iFixit 维修指南

简介

Need to replace those rubber cushions and washers on the trucks of your classic roller skates? No problem. The only tool required is a 14 mm wrench or ratchet and socket. Replacement cushions and washers are available online or at any respectable skate shop.

你所需要的

步骤 1 Sure-Grip Double Action Cushion

Roller Skate Double Action Cushion Replacement, Sure-Grip Double Action Cushion: 步骤 1 中的图像 1，1

Using a 14 mm wrench, loosen and extract the bolt from the base plate.

步骤 2

Roller Skate Double Action Cushion Replacement: 步骤 2 中的图像 1，1

Once the bolt is no longer in the base plate, lift and twist the entire truck assembly from the skate.

步骤 3

Roller Skate Double Action Cushion Replacement: 步骤 3 中的图像 1，2

Roller Skate Double Action Cushion Replacement: 步骤 3 中的图像 2，2

Flip the truck over and remove the nut from the truck assembly bolt.

步骤 4

Roller Skate Double Action Cushion Replacement: 步骤 4 中的图像 1，2

Roller Skate Double Action Cushion Replacement: 步骤 4 中的图像 2，2

Remove both sets of cushions and retaining washers from the bolt.

步骤 5

Roller Skate Double Action Cushion Replacement: 步骤 5 中的图像 1，3

Roller Skate Double Action Cushion Replacement: 步骤 5 中的图像 2，3

Roller Skate Double Action Cushion Replacement: 步骤 5 中的图像 3，3

Remove the retaining washer from each cushion.
Use a spudger if the washer and cushion are difficult to separate.
Replace worn cushions and washers.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Jen Rushing

于05/24/15注册

1 声望

撰写一个指南

团队

CCNTH Repair Project CCNTH Repair Project 的会员

Community

2 名成员

创作了3篇指南

0条评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 9

过去 30 天： 20

总计 2,096