Roconia Q6 Lamp Replacement

简介

This is a step-by-step guide on how to locate and replace the lamp of the Roconia Q6 projector. The lamp is located in the second layer of the projector, so it requires a bit more work and carefulness to reach and replace.

你所需要的

步骤 1 Top Cover

Roconia Q6 Lamp Replacement, Top Cover: 步骤 1 中的图像 1，2

Roconia Q6 Lamp Replacement, Top Cover: 步骤 1 中的图像 2，2

Flip your device upside down so that the interface is facing downwards.

翻译

步骤 2

Roconia Q6 Lamp Replacement: 步骤 2 中的图像 3，3

The device is supported by rubber pieces located at the bottom extremities.
There are screws beneath the rubber pieces that can be removed. Remove all four 1.1 mm Phillips #1 screws by using the Phillips #0 screwdriver.

翻译

步骤 3

Roconia Q6 Lamp Replacement: 步骤 3 中的图像 3，3

Turn device over again and pry open the device to remove the cover.

翻译

步骤 4

Roconia Q6 Lamp Replacement: 步骤 4 中的图像 3，3

Pull out the cable that is connected to the top cover to fully separate.

翻译

步骤 5 Lamp

Roconia Q6 Lamp Replacement, Lamp: 步骤 5 中的图像 1，3

Roconia Q6 Lamp Replacement, Lamp: 步骤 5 中的图像 2，3

Roconia Q6 Lamp Replacement, Lamp: 步骤 5 中的图像 3，3

We need to locate the screws which are holding down another plastic covering.
Use a Phillips #1 screwdriver to remove each of the highlighted 8.8 mm screws.

翻译

步骤 6

Roconia Q6 Lamp Replacement: 步骤 6 中的图像 3，3

There is another screw holding down the plastic covering and it is located on the motherboard. With the same screwdriver, remove that screw.
Now carefully pull out the highlighted cables that is connecting to the motherboard that will prevent you from completely removing the plastic cover.

翻译

步骤 7

Roconia Q6 Lamp Replacement: 步骤 7 中的图像 3，3

From here you will be able to safely remove the plastic covering and expose a second layer of parts.

翻译

步骤 8

Roconia Q6 Lamp Replacement: 步骤 8 中的图像 3，3

We can now locate the lamp which is being held in place by the mirror part.
Carefully remove the mirror, without putting any smudges on the inside from our finger.
From there you will be able to remove the lamp and replace.