跳转到主内容

Roconia Q6 Fan Replacement

你所需要的

  1. Roconia Q6 Fan Replacement, Top Cover: 步骤 1 中的图像 1,2 Roconia Q6 Fan Replacement, Top Cover: 步骤 1 中的图像 2,2
    • Flip your device upside down so that the interface is facing downwards.

  2. Roconia Q6 Fan Replacement: 步骤 2 中的图像 1,3 Roconia Q6 Fan Replacement: 步骤 2 中的图像 2,3 Roconia Q6 Fan Replacement: 步骤 2 中的图像 3,3
    • The device is supported by rubber pieces located at the bottom extremities.

    • There are screws beneath the rubber pieces that can be removed. Remove all four 1.1 mm Phillips #1 screws by using the Phillips #0 screwdriver.

  3. Roconia Q6 Fan Replacement: 步骤 3 中的图像 1,3 Roconia Q6 Fan Replacement: 步骤 3 中的图像 2,3 Roconia Q6 Fan Replacement: 步骤 3 中的图像 3,3
    • Turn device over again and pry open the device to remove the cover.

  4. Roconia Q6 Fan Replacement: 步骤 4 中的图像 1,3 Roconia Q6 Fan Replacement: 步骤 4 中的图像 2,3 Roconia Q6 Fan Replacement: 步骤 4 中的图像 3,3
    • Pull out the cable that is connected to the top cover to fully separate.

  5. Roconia Q6 Fan Replacement, Fan: 步骤 5 中的图像 1,1
    • Use the opening guide to open the device. Once open find the fan located in the back corner of the device

  6. Roconia Q6 Fan Replacement: 步骤 6 中的图像 1,1
    • To remove the fan from its holder, simply pull it out.

  7. Roconia Q6 Fan Replacement: 步骤 7 中的图像 1,3 Roconia Q6 Fan Replacement: 步骤 7 中的图像 2,3 Roconia Q6 Fan Replacement: 步骤 7 中的图像 3,3
    • Remove the sticker on the back of the fan to reveal soldered wires.

    • Using a soldering iron, desolder the wiring from the fan.

结论

To reassemble your device, follow these instructions in reverse order.

Axel

于02/08/24注册

97 声望

撰写一个指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 12

总计 42