配件

无需配件。

  1. Make sure the toaster is unplugged before starting. Turn the toaster upside down and remove the rubber feet.
    • Make sure the toaster is unplugged before starting.

    • Turn the toaster upside down and remove the rubber feet.

  2. Using a #2 Phillips head screwdriver, remove the four 12mm screws that attach the toaster shell. Using a #2 Phillips head screwdriver, remove the four 12mm screws that attach the toaster shell.
    • Using a #2 Phillips head screwdriver, remove the four 12mm screws that attach the toaster shell.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  4. With the dial facing you, push the toaster base up and away until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster. When reassembling the toaster, make sure that the back of the dial lines up with the slot both in position and orientation (the dial and slot are not perfect  circles - they have a notch). The only object holding the shell onto the  toaster now is the grey part of the lever.
    • With the dial facing you, push the toaster base up and away until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster.

    • When reassembling the toaster, make sure that the back of the dial lines up with the slot both in position and orientation (the dial and slot are not perfect circles - they have a notch).

    • The only object holding the shell onto the toaster now is the grey part of the lever.

  5. Reach under the shell and grab the back, white part of the lever.
    • Reach under the shell and grab the back, white part of the lever.

    • Grab the grey lever between your index finger and your middle finger and pull.

    • Pulling too hard will break the mechanism that holds the grey handle onto the white lever.

    • Remove the shell.

  6. After disassembling the toaster, turn the back side of the toaster towards you.
    • After disassembling the toaster, turn the back side of the toaster towards you.

    • On the back of the toaster the metal tabs attached to the bread shelf should be visible.

    • These tabs will sometimes get caught in the shaft which disables your toaster from returning the bread.

  7. Twist the metal tabs to vertical position to allow them to glide along the slot.
    • Twist the metal tabs to vertical position to allow them to glide along the slot.

    • Push down on the white lever on the opposite side repeatedly to ensure that the metal tabs will no longer stick.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Kristen

于2012年09月26日注册

102 信誉积分

撰写一个指南

团队

Cal Poly, Team 2-8, Propen Fall 2012 Cal Poly, Team 2-8, Propen Fall 2012 的会员

CPSU-PROPEN-F12S2G8

5 名成员

创作了6篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 750