跳转到主内容

Ring Video Doorbell Pro Housing Repalcement

你所需要的

  1. Ring Video Doorbell Pro Housing Repalcement, Housing: 步骤 1 中的图像 1,1
    • Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.

  2. Ring Video Doorbell Pro Housing Repalcement: 步骤 2 中的图像 1,3 Ring Video Doorbell Pro Housing Repalcement: 步骤 2 中的图像 2,3 Ring Video Doorbell Pro Housing Repalcement: 步骤 2 中的图像 3,3
    • Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.

  3. Ring Video Doorbell Pro Housing Repalcement: 步骤 3 中的图像 1,1
    • Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.

  4. Ring Video Doorbell Pro Housing Repalcement: 步骤 4 中的图像 1,2 Ring Video Doorbell Pro Housing Repalcement: 步骤 4 中的图像 2,2
    • Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.

  5. Ring Video Doorbell Pro Housing Repalcement: 步骤 5 中的图像 1,1
    • Remove the front of the device from the back plate.

结论

To reassemble your device, attach the new housing and follow these instructions in reverse order.

4等其他人完成本指南。

Jake Dixon

于11/09/17注册

835 声望

创作了4篇指南

团队

IUPUI, Team S7-G4, Baechle Fall 2017 IUPUI, Team S7-G4, Baechle Fall 2017 的会员

IUPUI-BAECHLE-F17S7G4

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 16

过去 30 天: 98

总计 22,766