修复你的物品 社区 商店

Ring Video Doorbell 3 Camera Sensor Replacement

简介

This is a step-by-step guide that will walk through the process of replacing the camera sensor on the Ring Doorbell 3. The camera sensor is a component that detects motion in the surroundings, triggering motion alerts and video recordings. Problems with the camera picking up motion could be the result of a camera sensor problem. More information for solutions to these issues can be found on the Ring Doorbell Troubleshooting Page. Since the device needs to be taken apart to access the parts, some users may not know how to dismantle it, which is where this guide can come in handy.

你所需要的

  1. Ring Video Doorbell 3 Camera Sensor Replacement, Faceplate: 步骤 1 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement, Faceplate: 步骤 1 中的图像 2，2

    • Look at the bottom of the device and locate the arrow.

    • Use your fingers to push the silver faceplate in the direction of the arrow.

    编辑

  2. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 2 中的图像 1，1

    • Push up to take the face plate off.

    编辑

  3. Ring Video Doorbell 3 Camera Sensor Replacement, Battery: 步骤 3 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement, Battery: 步骤 3 中的图像 2，2

    • Push in the silver tab and slide the battery out.

    编辑

  4. Ring Video Doorbell 3 Camera Sensor Replacement, Motherboard: 步骤 4 中的图像 1，3 Ring Video Doorbell 3 Camera Sensor Replacement, Motherboard: 步骤 4 中的图像 2，3 Ring Video Doorbell 3 Camera Sensor Replacement, Motherboard: 步骤 4 中的图像 3，3

    • Remove the 6 screws with a Torx T6 screwdriver.

    • Remove the 2 screws with a Torx T5 screwdriver.

    编辑

  5. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 5 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 5 中的图像 2，2

    • Put your thumb where the battery was and push outwards to remove the back case.

    编辑

  6. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 6 中的图像 1，3 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 6 中的图像 2，3 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 6 中的图像 3，3

    • Get a tweezer, and remove the black and grey antenna wires.

    编辑

  8. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 7 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 7 中的图像 2，2

    • Disconnect the camera sensor.

    编辑

  9. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 8 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 8 中的图像 2，2
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Be cautious to not rip the ribbon cable.

    • Lift the black tab above the ribbon to unlock it.

    • Use the tweezers to pull out the ribbon.

    编辑

  10. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 9 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 9 中的图像 2，2

    • Use a Torx T6 but to take out the four screws on the first motherboard.

    编辑

  11. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 10 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 10 中的图像 2，2

    • Use an opening tool to take out the motherboard.

    • Make sure to push in the 5 pins while taking out the motherboards to ensure that they do not break.

    编辑

  12. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 11 中的图像 1，1

    • The motherboard has been taken out, and now it is free to be replaced or worked on.

    编辑

  13. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 12 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 12 中的图像 2，2

    • Flip the two boards on the side.

    • Gently pull the motherboard and the camera board apart.

    编辑

  14. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 13 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 13 中的图像 2，2

    • Use the Phillips #00 screwdriver to remove the two screws.

    编辑

  15. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 14 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 14 中的图像 2，2

    • Carefully remove the camera lens from the board.

    • Replace Motherboard(s) if needed.

    • Replace Camera if needed.

    编辑

  16. Ring Video Doorbell 3 Camera Sensor Replacement, Camera Sensor: 步骤 15 中的图像 1，1

    • After setting the motherboard aside, grab the case.

    编辑

  17. Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 16 中的图像 1，2 Ring Video Doorbell 3 Camera Sensor Replacement: 步骤 16 中的图像 2，2

    • Desolder these three spots with 4 points and remove the solder.

    • Carefully peel off the camera sensor to remove it

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 18

总计 112