修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Ring Video Doorbell Camera Replacement

简介

In this guide, you will be shown how to take apart and replace the camera of the Ring Video Doorbell step-by-step. You will need a Phillips screwdriver size PH00 and a Plastic Tool Opener.

你所需要的

  1. Ring Video Doorbell Camera Replacement, Camera: 步骤 1 中的图像 1，3 Ring Video Doorbell Camera Replacement, Camera: 步骤 1 中的图像 2，3 Ring Video Doorbell Camera Replacement, Camera: 步骤 1 中的图像 3，3

    • Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw's on the bottom of the device.

    • Pry open the aluminum plate using the Plastic Opening Tool(s).

    • Remove the 2 1. mm screws using the PH00 Phillips Screwdriver.

    翻译

  2. Ring Video Doorbell Camera Replacement: 步骤 2 中的图像 1，3 Ring Video Doorbell Camera Replacement: 步骤 2 中的图像 2，3 Ring Video Doorbell Camera Replacement: 步骤 2 中的图像 3，3

    • Pry open the back case as shown using the Plastic Opening Tool.

    • Disconnect the battery from motherboard by carefully pulling up on the connector.

    翻译

  4. Ring Video Doorbell Camera Replacement: 步骤 3 中的图像 1，3 Ring Video Doorbell Camera Replacement: 步骤 3 中的图像 2，3 Ring Video Doorbell Camera Replacement: 步骤 3 中的图像 3，3

    • Unscrew the 9 1 mm screwdrivers using a PH00 Phillips Screwdriver.

    • Carefully detach the motherboard, from the housing unit using your hands.

    翻译

  5. Ring Video Doorbell Camera Replacement: 步骤 4 中的图像 1，2 Ring Video Doorbell Camera Replacement: 步骤 4 中的图像 2，2

    • Using the Plating Tool Opener, arefully disconnect the ribbon cable that attaches the camera to the housing.

    • Replace camera, and follow the steps in reverse order to reassemble

    翻译

    Where do you find the replacement camera dropped mine and cameras lens busted?

    Michelle McCord - 回复

    Ok now now that you told me how to replace the camera. Where can I buy a camera to replace my scratched and broken lens?

    Help!??

    Evrt M - 回复

    Same here, where do you get the replacement from?

    Steve.D70 - 回复

  6. Ring Video Doorbell Camera Replacement: 步骤 5 中的图像 1，2 Ring Video Doorbell Camera Replacement: 步骤 5 中的图像 2，2

    • Unscrew the two 1 mm screws using the PH00 Philips Screwdriver.

    • Detach the black and red wire connected to the motherboard, using the tweezers, to remove the camera.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与2其他贡献者

Isaiah Wilson

于02/20/18注册

231 声望

撰写一个指南

徽章: 6

+ 3更多徽章

团队

USF Tampa, Team S11-G5, Cheng Spring 2018 USF Tampa, Team S11-G5, Cheng Spring 2018 的会员

USFT-CHENG-S18S11G5

3 名成员

创作了10篇指南

8条评论

What camera should I use to replace a malfunctioning camera in the ring video doorbell? And where do I buy it?

jonathan.byus - 回复

Bump. What camera should I use to replace? (Scratched Lens.) Is the lens you can touch, a lens, or is it just a cover? Mine fell at there is chip right in the center that make the image unusable.

Bobby Diggins - 回复

I have a scratch dead center of mine too. Have no clue how it got there as I’m super careful when I take it off to charge. Ugh. did you find out where to buy a replacement?

Kim Townsend -

What camera should I use to replace? (Scratched Lens.)  I have the right 1st generation with a 740p camera

meanltltoo - 回复

Has anyone found a replacement camera online?

christina.stewart - 回复

So what's up with trying to find a replacement camera cuz my lens is broken?

Evrt M - 回复

I also need to know where to buy the replacement lens?? I’m not seeing that question answered by anyone….

Dawn Smith - 回复

Same here, pointless showing how to replace it if we don’t know where to get a replacement other than a used item.

Steve.D70 - 回复

添加评论

浏览统计数据:

过去 24 小时： 7

过去 7 天： 37

过去 30 天： 153

总计 15,577