修复你的物品 社区 商店

Ring Outdoor Security Cam Speakers Replacement

简介

This guide is for the purpose of demonstrating how to replace a Ring Outdoor Security Cam speaker. Like many cameras, a common issue with Ring's outdoor cam is the speaker's which overtime can become damaged resulting in warped or no audio. There are no safety hazards for this fix, and the difficulty level is moderate. It's an easy, fast fix with no specific experience or knowledge aside from screws.

你所需要的

  1. Ring Outdoor Security Cam Speakers Replacement, Speakers: 步骤 1 中的图像 1，1

    • Remove the six 6 mm Phillips #00 screws from the back on the device.

    编辑

  2. Ring Outdoor Security Cam Speakers Replacement: 步骤 2 中的图像 1，1

    • Pry off the aluminum plate using a plastic opening tool.

    编辑

  3. Ring Outdoor Security Cam Speakers Replacement: 步骤 3 中的图像 1，1

    • Use an opening tool to pry the back plate off of the device.

    编辑

  4. Ring Outdoor Security Cam Speakers Replacement: 步骤 4 中的图像 1，1

    • Disconnect the battery power leads using a plastic opening tool.

    编辑

  6. Ring Outdoor Security Cam Speakers Replacement: 步骤 5 中的图像 1，1

    • Use a plastic opening tool to loosen the adhesive holding the battery in place and remove the battery by hand.

    编辑

  7. Ring Outdoor Security Cam Speakers Replacement: 步骤 6 中的图像 1，1

    • Disconnect the ribbon cable carefully at the bottom of the device.

    • Remove the 3 silver 6 mm Phillips #00 screws from the motherboard.

    编辑

  8. Ring Outdoor Security Cam Speakers Replacement: 步骤 7 中的图像 1，1

    • Pull the top of the motherboard up and out of the device.

    编辑

  9. Ring Outdoor Security Cam Speakers Replacement: 步骤 8 中的图像 1，2 Ring Outdoor Security Cam Speakers Replacement: 步骤 8 中的图像 2，2

    • Remove the silver 5vmm Phillips #00 screw, and the two 10mm Phillips #00 from the next circuit board.

    • Remove the 3 plastic spacers on the device.

    编辑

  10. Ring Outdoor Security Cam Speakers Replacement: 步骤 9 中的图像 1，3 Ring Outdoor Security Cam Speakers Replacement: 步骤 9 中的图像 2，3 Ring Outdoor Security Cam Speakers Replacement: 步骤 9 中的图像 3，3

    • Pry the motherboard out with a plastic opening tool.

    • Flip the device over and then carefully press on the camera lens to remove the camera and the attached mother board from the device.

    编辑

  11. Ring Outdoor Security Cam Speakers Replacement: 步骤 10 中的图像 1，2 Ring Outdoor Security Cam Speakers Replacement: 步骤 10 中的图像 2，2

    • Remove the six silver 4.5 mm Phillips #00 screws holding the daughterboard into the device.

    • Then use the plastic prying tool to remove the final daughterboard and attached microphone

    编辑

  12. Ring Outdoor Security Cam Speakers Replacement: 步骤 11 中的图像 1，1

    • Using the plastic prying tool pop out the speakers on the back of the daughterboard.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 4

总计 103