跳转到主内容

Ring Doorbell Battery Replacement

你所需要的

  1. Ring Doorbell Battery Replacement, Battery: 步骤 1 中的图像 1,1
    • Start by removing the 8 screws. the 4 black ones are hidden by the aluminum plate.

  2. Ring Doorbell Battery Replacement: 步骤 2 中的图像 1,2 Ring Doorbell Battery Replacement: 步骤 2 中的图像 2,2
    • Pry the aluminum cover carefully off- this will reveal the 4 black screws underneath. You will need a micro phillips screwdriver to remove these tiny screws.

  3. Ring Doorbell Battery Replacement: 步骤 3 中的图像 1,1
    • Carefully pry the plastic with a plastic pry tool to pop the insert out- watch the micro usb port that is sticking out...

  4. Ring Doorbell Battery Replacement: 步骤 4 中的图像 1,1
    • carefully pull directly up on the connector. The battery MAY still be attached to the plate-so be careful.

  5. Ring Doorbell Battery Replacement: 步骤 5 中的图像 1,1
    • This battery is two Lithium polymer batteries connected in parallel to the regulator. The batteries are back to back and are rated at 9.47wh @ 3.75v each...I have yet to find this battery but assume it is available somewhere in raw form.

    • assembly is pretty straight forward- just reassemble in reverse order- good luck!

结论

To reassemble your device, follow these instructions in reverse order.

33等其他人完成本指南。

Greg Beeblebrox

于06/11/14注册

1,157 声望

创作了2篇指南

59条评论

This is one of the few products that it's rarely if ever necessary to replace a battery in, as the warranty will cover a rapidly draining or not-charging battery. I'm glad you didn't tear down your chime, too! ;)

pyrodice - 回复

disagree. my battery went.

ralph -

Without a doubt there is a fault with the batteries on these 2020 5UM5E5 models. I’ve just had to replace the battery in mine. Bought from here.

https://www.ebay.co.uk/itm/304494747020?...

Matt Crooke -

Where can the battery be purchased?

Mike Menendez - 回复

添加评论

浏览统计数据:

过去 24 小时: 54

过去 7 天: 390

过去 30 天: 1,610

总计 189,696