修复你的物品 社区 商店

Ridgid R175RNE Swivel Air Plug Replacement

简介

If your Ridgid R175RNE nailer is firing sluggishly or not at all, then the air-line connector may need to be replaced.

The air-line connector is used to connect the nailer to your air supply, so that the nailer may function.

Caution: Turn off and remove the air supply before beginning this guide.

你所需要的

  1. Ridgid R175RNE Swivel Air Plug Replacement, Swivel Air Plug: 步骤 1 中的图像 1，3 Ridgid R175RNE Swivel Air Plug Replacement, Swivel Air Plug: 步骤 1 中的图像 2，3 Ridgid R175RNE Swivel Air Plug Replacement, Swivel Air Plug: 步骤 1 中的图像 3，3

    • Disconnect the nailer from the air compressor before beginning.

    • Use a 5/32" Allen wrench to remove all three 25 mm screws that secure the swivel air plug.

    • Remove the swivel air plug.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 21

总计 38