修复你的物品 社区 商店

Ridgid R175RNE Magazine Replacement

简介

If your Ridgid R175RNE pneumatic coil nailer magazine is cracked or is otherwise no longer able to hold nails, then follow this guide to learn how to replace the magazine.

The magazine is what holds the coil of nails prior to them being fired, and is located directly below the firing mechanism.

Caution: Be sure that there are no nails present in the magazine before removing it.

你所需要的

  1. Ridgid R175RNE Magazine Replacement, Magazine: 步骤 1 中的图像 1，1

    • Disconnect the nailer from the air compressor before beginning.

    • Set the nailer down with the nosepiece facing to the left.

    翻译

  3. Ridgid R175RNE Magazine Replacement: 步骤 2 中的图像 1，1

    • Remove the single 5/32" hex screw that secures the magazine to the lower portion of the handle.

    翻译

  4. Ridgid R175RNE Magazine Replacement: 步骤 3 中的图像 1，1

    • Give the magazine a slight tug to detach it from the upper firing assembly.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 18

总计 44